12-23-2008, 05:39 PM #1
Wtb: Thru hull flange & blockoff plug
Need the flange that goes on the INSIDE of the hull, the one withe the threads.
also need blockoff plug for stock exhaust.
12-24-2008, 03:31 PM #2
12-24-2008, 03:36 PM #3
12-25-2008, 04:04 AM #4
just make one out of some flat pvc, like scrap from a vinyl fence, or a flat piece of aluminum, like a stop sign, or something similar, you could even use a plastic cutting board from walmart for like 5 bux.
just cut it square to size, and tap and drill in some heavy thread screws, anchor the screws with some right stuff/permatex and runa bead of the same stuff around the edge of the square to seal it to the hull.
as long as your material is not gong to crack or break easily, it is fine.
i used vinyl fence material, cut it, rounded the corners so it looked custom, painted it glossy black epoxy spray paint, the kind for appliances from walmart.
and sealed it screwed it on.
unless i smack it with a hammer its not breaking.
just like the opas blockoff plate, but homemade.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By JonnyRXT in forum Sea Doo ClassifiedsReplies: 0Last Post: 05-27-2009, 06:45 PM
By kepneriphone in forum Polaris ClassifiedsReplies: 16Last Post: 03-02-2009, 02:48 PM
By ADAMBOMB in forum Sea Doo ClassifiedsReplies: 4Last Post: 11-07-2008, 01:30 PM
By Raider Kevin in forum Yamaha ClassifiedsReplies: 2Last Post: 10-17-2008, 08:09 PM
By hitevrywave in forum Sea Doo ClassifiedsReplies: 0Last Post: 05-12-2008, 05:06 PM