01-04-2009, 09:41 PM #1
UMI Steering install problems... any how to thread links?
I am having a few problems installing a UMI system in my 2006 GPR. The plate has 4 holes that are arranged in a square pattern. The hull has six holes four of which are close, the lower two look to line up and the upper two are too wide... do you have to drill the hull? Any pictures of installed UMI systems?
01-04-2009, 09:42 PM #2
Also... anything special to do to disable the off throttle steering system?
01-04-2009, 10:53 PM #3
WFO just replied to a thread of this nature.He redrilled the holes on the deck,not sure about the off throttle.
01-04-2009, 10:57 PM #4
01-05-2009, 08:54 AM #5
01-05-2009, 09:46 AM #6
You will have to drill 2 new holes through the top deck and through the backing plate. FYI the backing plate is SS so it is really hard to drill, I had the machinist at work do it.
As far as the off throttle stuff, I relocated it on the inside of the ski out of the way.
It can be done and you will be glad you did when you are finished.
01-05-2009, 10:23 AM #7
- Join Date
- Aug 2006
speed is your enemy when drilling ss
01-05-2009, 03:40 PM #8
01-05-2009, 03:43 PM #9
01-05-2009, 03:56 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By CarFanatic in forum Sea Doo How To & FAQsReplies: 34Last Post: 01-15-2012, 04:39 PM
By turbo_rafi in forum 4-Tec PerformanceReplies: 11Last Post: 08-17-2011, 05:53 PM
By GTLaser in forum 4-Tec PerformanceReplies: 13Last Post: 12-09-2009, 09:22 PM
By caliburst in forum 4-Tec PerformanceReplies: 22Last Post: 09-09-2009, 06:39 PM
By mstennes in forum 4-Tec PerformanceReplies: 6Last Post: 09-02-2008, 12:06 AM