Results 1 to 7 of 7
  1. #1

    FS Some SD parts that wouldnt fit my Kawi

    Ill list the prices below retail and you dont have to pay the shipping from New Zealand. Will part them out separately.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Klipper_Dec_08_042[1].JPG 
Views:	93 
Size:	3.77 MB 
ID:	111174  


  2. #2
    CC Racer kenshin89's Avatar
    Join Date
    May 2005
    Location
    VA
    Posts
    2,902
    +1
    2
    Lots of nice Seadoo Centre parts you have there Skip.

  3. #3
    CC Racer kenshin89's Avatar
    Join Date
    May 2005
    Location
    VA
    Posts
    2,902
    +1
    2
    If anyone if curious here is the descriptions off of Seadoo Centre's site.

    Adjustable pump cone for oem pump Adjustable pump cone, for oem Seadoo pumps, allows the water to flow more efficiently, this in term provides improved handling, take off power and performance. The length of the cone can be changed by adding/removing the spacer washers in the unit, by adding washers it will increase the pump pressure and reduce cavitation. It is made from light weight Anodised billet aluminium for superior protection against corrosion.


    RXP-X Steering clamp This clamp replaces the standard clamp and will position the handle bars into a more lower and more comfortable position. For racing purposes, on the RXP-X this is an absolute must.




    A Kit Impeller - Makes 0.7 bar boost Extremely light weight Anodised billet aluminium, superior protection against corrosion, makes 0.7 bar boost = 10lb
    Easily installed on OEM housings. Suits RXP, RXT & GTX, , bolts straight in with no modifications to the supercharger housings. Comes with a precision made washer for under the supercharger nut to keep the balancing perfect.

    A Kit -R Impeller - Makes 0.77 bar boost Anodised billet aluminium, superior protection against corrosion, makes 0.77 bar boost = 11lb
    Comes with set of seadoo centre steel washers.
    Easily installed on OEM housings. Suits RXP, RXT & GTX, , bolts straight in with no modifications to the supercharger housings. Comes with a precision made washer for under the supercharger nut to keep the balancing perfect.

    A Kit -X Impeller - Makes 0.84 bar boost Anodised billet aluminium, superior protection against corrosion, makes 0.84 bar boost = 12lb
    Comes with set of seadoo centre steel washers.
    Easily installed on OEM housings. Only suits RXP-X and RXT-X models, bolts straight in with no modifications to the supercharger housings. Comes with a precision made washer for under the supercharger nut to keep the balancing perfect.

  4. #4
    Hardened clutch washers Supercharger clutch washers, made from a high grade hardened alloy and coated, not surface ground. The running surfaces on these washers are machined to a flat finish and chamfered to give a circular finish, this will prevent premature wear on the super charger gear and shaft. Most other copies of our washers are surface ground because of poor quality materials that warp in the hardening process, the grinding produces a grain across the washer which is abrasive and will wear out the sides of the supercharger gear. Available for all supercharged models.




    I have washer too. Two sets. $125 Les Cooke

  5. #5
    A-kit wheel $450
    A-Kit R wheel $525
    A-Kit X wheel $650

    RXT-X / RXP-X steering clamps $275

    Pump Cone for stock pump $275

    All Les Cooke items.

    + 48 state shipping

  6. #6

    Join Date
    Feb 2008
    Location
    Massa Italy
    Posts
    414

    pump cone

    Interested to pump cone
    PM sent

  7. #7
    got it,

    Down to one pump cone.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Looking for a used EFI controller that will fit my GP1300r
    By daraji91 in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 05-30-2014, 01:12 PM
  2. What are some polaris parts that are hard to find new?
    By 1FASTXC in forum Polaris Open Discussion
    Replies: 12
    Last Post: 09-16-2012, 10:43 AM
  3. I'm putting some new parts on my ski tomorrow
    By Green Hulk in forum 4-Tec Performance
    Replies: 16
    Last Post: 11-30-2008, 08:28 AM
  4. Replies: 8
    Last Post: 07-31-2008, 11:56 AM
  5. need part # for black bumper rail that will fit '06 RXP
    By TorquePhoto in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-26-2006, 09:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •