01-06-2009, 08:24 PM #1
I need pictures of the external fuel pump plates you guys made.
I just wanted some pictures of the plate and how you mounted your external fuel pumps. Tryig to get an idea on how big the plate needs to be, the thickness of metal, aluminum or ss, yada yada.
01-07-2009, 07:08 AM #2
- Join Date
- Jul 2008
- Chesterfield Virginia USA ~ On the James River~
Here is my setup.
01-07-2009, 03:40 PM #3
01-07-2009, 05:08 PM #4
Carl glued those little zip tie plates to the inside of my hull. You can get them at Home Depot or lowes... No drilling and very clean look. Been on now for 4 years with no issues what so ever!!
01-11-2009, 12:38 AM #5
what i really need to know is can I mount my pumps in any direction? On a slant? Just wanted to see some of them tripple pipe gprs ran 3 pumps. Just wanted to see how they were mounted.
01-11-2009, 01:06 AM #6
- Join Date
- Aug 2006
those pumps won't know how they are mounted but I would aim them up slightly towards the separator if possible to let gravity get any air out and into the separator ,IMHO
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ryancoggo in forum Yamaha PWC Performance (2-stroke)Replies: 4Last Post: 04-19-2012, 01:10 AM
By starter99 in forum 4-Tec PerformanceReplies: 3Last Post: 05-23-2011, 03:43 PM
By pilo704 in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 01-08-2010, 06:04 PM
By Green Hulk in forum Yamaha PWC Performance (2-stroke)Replies: 4Last Post: 08-04-2006, 02:07 PM
By Green Hulk in forum 4-Tec PerformanceReplies: 0Last Post: 08-04-2006, 12:41 PM