01-09-2009, 09:45 PM #1
Anybody replace the bearings in a 4tec head?
Guys my head that I got off of the motor I bought from Savage has a questionable head issue. It looks as if this head had suffered a washer failure and I was just wondering if anyone replaces the bearings in the 4tec heads?
If anyone has had a ceramic failure and had issue's with the head? What did you do about it?
Will add pics if need be.
DON"T BRING UP THE ISSUE ON THE MOTOR, PLEASE.
Lets just talk about fixing it.
01-09-2009, 09:50 PM #2
There is no bearing in the 4 -tec head.
Cam journal bearing surface is machined in to the head, it might be more cost effective to just replace the head with a used one.
01-09-2009, 10:01 PM #3
01-10-2009, 12:19 AM #4
Doesn't look great, but i've seen worse. Take it to a machine shop and ask their opinion.
01-10-2009, 12:44 AM #5
01-10-2009, 11:15 AM #6
01-10-2009, 11:26 AM #7
01-10-2009, 02:14 PM #8
- Join Date
- Jun 2005
- rome ga
Polish it and run it.
01-10-2009, 02:23 PM #9
01-10-2009, 03:04 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By DR2006RXP in forum 4-Tec PerformanceReplies: 44Last Post: 08-19-2015, 05:30 PM
By JeffSki in forum Sea Doo Open DiscussionReplies: 1Last Post: 11-14-2012, 03:48 PM
By philip_gpr in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 03-04-2007, 11:17 AM
By Pale Rider in forum 4-Tec PerformanceReplies: 27Last Post: 03-16-2006, 04:57 PM
By Pale Rider in forum 4-Tec PerformanceReplies: 6Last Post: 12-04-2005, 09:25 AM