Thread: Bilge Pump ?
01-13-2009, 05:44 PM #1
Bilge Pump ?
I have a 2003 GP1300R with factory Rule 500GPM bilge pump. It is powered through the ski's computer.
While removing the exhaust I noticed the output nozzle on the pump is broken. I need to buy another bilge pump, but I am not sure if I should by another Rule 500 non auto pump or go with the auto? Even thinking about getting the Rule 800 non auto to fit in its place.
Looking for suggestions or if anyone has a pump laying around. PM me what you want for it.
01-13-2009, 05:53 PM #2
Rule 25s 6wc is what you want. It auto cycles.
01-13-2009, 05:58 PM #3
And I am assuming you can plug the pump into the same stock connector. Maybe have to splice a wire or two depending on pump wiring?
01-13-2009, 07:42 PM #4
i belive the ski controls the pump and to get the non auto pump
01-13-2009, 08:11 PM #5
- Join Date
- Aug 2006
the std Rule non auto pump runs all the time with the ski running , stick with the non auto cycle pump for this IMHO but the 25s 6wc does cylcle and sense more often than the Rule auto 25a by about a minute 40 seconds
both those are good for a secondary pump while at anchor IMHO
01-13-2009, 08:28 PM #6
If you want a switch I have a waterproof switch and handlebar mount: 50.00 plus shipping.
01-14-2009, 09:47 AM #7
Thanks for the info everyone.
Kris, No need for a switch, but thanks for the offer.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Vern in forum 4-Tec PerformanceReplies: 14Last Post: 08-27-2014, 10:04 AM
By USS RXT in forum Sea Doo How To & FAQsReplies: 59Last Post: 03-16-2010, 10:02 PM
By Red Devil in forum 4-Tec PerformanceReplies: 1Last Post: 08-09-2005, 10:01 AM
By ToeSurf in forum 4-Tec PerformanceReplies: 4Last Post: 07-03-2005, 01:00 PM
By Jeff C in forum Sea Doo Open DiscussionReplies: 1Last Post: 06-22-2005, 12:22 AM