Results 1 to 10 of 10
  1. #1
    meansvt00's Avatar
    Join Date
    Jul 2007
    Location
    New Jersey
    Posts
    237

    Question injector spec question

    i searched but could not find the answer. what are the specs for our injectors i know the stock are 38lb i was looking at a set of 42lb injectors and im not sure if they will work.

    here is the specs
    Static Flow Rate: 42.29 lb/hr (+/-4%)
    Dynamic Flow @ 2.5ms PW @ 100Hz: 9.96 mg/pulse (+/-6%)
    Coil Resistance: 15.9 Ohms (+/-0.35 Ohms) (This high-impedance injector will work with all factory ECM/PCM injector drivers)
    Spray Pattern: Tri-Cone

    Physical Dimensions: EV1 Body Type

    Connector: Minitimer (Bosch EV1)
    Factory fitted with Viton upper and lower o-rings.


  2. #2
    Rompe21's Avatar
    Join Date
    Jul 2006
    Location
    Tampa , Florida
    Posts
    717
    Quote Originally Posted by meansvt00 View Post
    i searched but could not find the answer. what are the specs for our injectors i know the stock are 38lb i was looking at a set of 42lb injectors and im not sure if they will work.

    here is the specs
    Static Flow Rate: 42.29 lb/hr (+/-4%)
    Dynamic Flow @ 2.5ms PW @ 100Hz: 9.96 mg/pulse (+/-6%)
    Coil Resistance: 15.9 Ohms (+/-0.35 Ohms) (This high-impedance injector will work with all factory ECM/PCM injector drivers)
    Spray Pattern: Tri-Cone
    Physical Dimensions: EV1 Body Type
    Connector: Minitimer (Bosch EV1)
    Factory fitted with Viton upper and lower o-rings.
    as longer they are High resisten you are ok

  3. #3
    meansvt00's Avatar
    Join Date
    Jul 2007
    Location
    New Jersey
    Posts
    237
    i wanted to make sure that the injector body and connector were correct

  4. #4
    Banned User
    Join Date
    Aug 2007
    Location
    Reading PA
    Posts
    1,670
    was wondering what part number and company u are looking at these injectors from?

  5. #5
    ROTAX RACING performance
    Join Date
    Apr 2005
    Location
    sweden
    Posts
    1,462
    +1
    17
    why you dont buy the injectors from Jerry or a set of oem X-Injectors, ?why take the stupid risk in running in to issues just to save a few cent ?

    - EV1 connector bosch is OK

    - 15 ohm is wrong !! you need 12 ohm

    - Try Cone spray is also not optimal.


    thats how they have to be:

    The Bosch 02 is a highly efficient fuel injector that incorporates a split/wide-cone fuel delivery.
    Use in engines with single- and multi-intake valves.
    EV1 Minitimer Electrical Connector -- 12.2 OHMS
    (Actual bench flow-test indicates 42.9lbs/hr

  6. #6
    meansvt00's Avatar
    Join Date
    Jul 2007
    Location
    New Jersey
    Posts
    237
    i have a set of 8 of the injectors i listed i was just curious if they would work. they looked to be similar.

    thats why i was curious of the actual specs of the seadoo injectors

  7. #7
    meansvt00's Avatar
    Join Date
    Jul 2007
    Location
    New Jersey
    Posts
    237
    Quote Originally Posted by mrracing View Post

    thats how they have to be:

    The Bosch 02 is a highly efficient fuel injector that incorporates a split/wide-cone fuel delivery.
    Use in engines with single- and multi-intake valves.
    EV1 Minitimer Electrical Connector -- 12.2 OHMS
    (Actual bench flow-test indicates 42.9lbs/hr
    where did you find this info

  8. #8
    GTXX's Avatar
    Join Date
    Jan 2006
    Location
    NW, GA
    Posts
    1,776
    another thing you have to look at is how the clip attaches. some the slot is lower and the Sea Doo clip won't work on it.

  9. #9
    GTXX's Avatar
    Join Date
    Jan 2006
    Location
    NW, GA
    Posts
    1,776
    that looks like a description of the green Bosch injectors that come in the X ski.

  10. #10
    meansvt00's Avatar
    Join Date
    Jul 2007
    Location
    New Jersey
    Posts
    237
    they are green top bosch injectors but they are for a ford lightning or mustang or other

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SHO Injector Specs?
    By SHOBiz in forum Yamaha PWC Performance (4-stroke)
    Replies: 31
    Last Post: 08-03-2011, 01:46 AM
  2. Spec Questions SL 750
    By Fattystew in forum Polaris Open Discussion
    Replies: 2
    Last Post: 07-14-2010, 11:56 AM
  3. Injector nozzle question
    By pdxrealtor in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-12-2010, 12:38 PM
  4. Injector install question
    By sweetbats in forum 4-Tec Performance
    Replies: 1
    Last Post: 12-22-2009, 01:03 AM
  5. stock injector spec?
    By pjsc823 in forum Sea Doo Open Discussion
    Replies: 1
    Last Post: 01-06-2009, 12:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •