02-04-2009, 05:22 PM #1
I got a 98 gp1200 and I tore the pump apart because I saw a rock stuck in the intake. So I tore it apart and found this look like a new housing and impellers. I think it stock not sure is there a way I can tell? Here some pics
If I need a new housing does any one have used parts???
The bearings seem fine well greased.
02-04-2009, 05:56 PM #2
The stator section definitely needs to be repaired or replaced. I personally would replace it. Post up in the classified section that you are wanting to buy a stator section for the 155mm pump also a wear ring. Both are available new from yamaha through lots of parts vendors including GH. You might want to consider a wear ring with a replaceable insert, WSM makes one.....JMO. Good luck, and good riding after you get it repaired.
02-04-2009, 06:00 PM #3
Get a solas prop as well that stock one is junk IMO
02-04-2009, 07:42 PM #4
I was looking at the the SBT prop for now. I just want to see how the ski feels. I never rode a GP1200. I rode a Ultra 150 and STX 1100 DI.
I am going to have the group-K do work to both skis next year.
I try to post on clasifieds says I can't
02-04-2009, 07:52 PM #5
SBT prop ?
Solas prop is what you need.
ebay or the clasifieds here should get you a new or used prop for $50-$100
02-04-2009, 08:47 PM #6
02-04-2009, 08:53 PM #7
I might need one in a month or so dont sell them all.......
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Vern in forum 4-Tec PerformanceReplies: 14Last Post: 08-27-2014, 10:04 AM
By nitro rxp in forum 4-Tec PerformanceReplies: 6Last Post: 06-04-2005, 09:00 PM
By peteshauling in forum 4-Tec PerformanceReplies: 20Last Post: 06-01-2005, 10:08 AM
By Green Hulk in forum 4-Tec PerformanceReplies: 34Last Post: 05-12-2005, 08:56 PM
By RXPNJ in forum 4-Tec PerformanceReplies: 8Last Post: 05-10-2005, 09:47 AM