Thread: X Camshaft
02-07-2009, 09:54 PM #1
Is there any difference in camshaft between the years 04 to 08 in aggresiveness.... I'm looking to put sn 05 cam in my 08 X.. Please help out if is worth the change
02-08-2009, 12:12 AM #2
I believe the 2004 skis had the most aggressive stock cam. Don't quote me on that though.
02-08-2009, 01:37 AM #3
if you had it apart anyway go ahead and change it, it is a better cam. no way would I take it apart just to swap the stock cams though.
02-08-2009, 11:40 AM #4
so the swap from 08 to 05 cam wouldn't be worth that much to do?
02-08-2009, 11:51 AM #5
02-08-2009, 11:55 AM #6
would the 04 be worth it.. I mean I know the Rotax cam is better but for the money is it worth the gain on a stock 04 or 05 cam
02-08-2009, 11:57 AM #7
I'm not sure if the 05 and 04 cams are the same but I do know that if you have an 07-08 ski and plan on running higher rpms you would be better off with an 04 cam as the 07+ are more likely to cause vave float.
02-08-2009, 12:01 PM #8
I've been trying to get an 04 cam but I haven't had any luck .... might anyone have one that you are trying to get rid of please PM and let me know
02-08-2009, 12:13 PM #9
- Join Date
- Feb 2006
I did it on a freinds RXPX to test it(05 cam).We put the 08 cam back in.It made no differance at all on a back to back test we thought we lost if anything.If you run big rpm's you might want too though for better valve control.
02-08-2009, 12:28 PM #10
So it might be good to put an 05 cam on for protection to the motor... I'm only running 8550 Rpms
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Shibby1485 in forum Sea Doo How To & FAQsReplies: 12Last Post: 05-18-2011, 12:39 PM
By Vern in forum 4-Tec PerformanceReplies: 69Last Post: 04-05-2009, 09:26 PM
By grantuk in forum 4-Tec PerformanceReplies: 29Last Post: 05-27-2008, 05:54 AM
By Shibby1485 in forum 4-Tec PerformanceReplies: 4Last Post: 01-22-2007, 05:36 PM
By GeoRXT in forum 4-Tec PerformanceReplies: 4Last Post: 04-22-2006, 10:35 AM