Thread: WTB: GPR800 parts
02-15-2009, 04:22 PM #1
WTB: GPR800 parts
1 power valve (just the blade)
4 motor mounts
1 stock prop
other parts of interest:
fuel valve turn nozzle (one that turns the fuel on and off) along with the washer up under it and the screw
02-15-2009, 05:08 PM #2
I have 4 mounts off a GP1200R
One PV from a GP1200R
One selector knob.
You can have the valve also but I cant find the large nut and washer and the little screw is broken off in the valve.
02-15-2009, 06:16 PM #3
Wheres the pin that goes through the top of the valve?
If 1200 motor mounts will work, I got those.
02-15-2009, 08:14 PM #4
- Join Date
- Aug 2007
- Rotterdam,NY & Moneta, VA
when i was looking for motor mounts a while ago i think i saw a different part number for the gp800r motor mounts. I COULD be wrong though.
boats.net has them listed for 79 bucks a piece
i just looked and the 800 motor mounts are round not square. dont ask me what the diffrence is or how it would be effected by going to square 1200 mounts. by the way dont shoot the messanger but sbt has them listed for 50 bucks a piece.
02-16-2009, 02:31 AM #5
i have a prop,but it maybe down on diameter as the liner was bubbled,apart from that it looks fine.
photo 1 i tryed to put empeller in the center of liner, photo 2 is push to 1 side.
02-16-2009, 09:31 AM #6
he has a prop on his ski, but he is just cavitating out of the hole BAD. So I kind of told him to get an unmolested stock prop for it.
02-16-2009, 09:33 AM #7
So still looking for 1 power valve, 4 motor mounts for an 800 (I'll test it out today to see if the 1200 mounts will work) and 1 prop.
04-24-2009, 10:47 PM #8
- Join Date
- Apr 2009
Seeking a guage cluster to the same ski.. XL800 may work. In case anyone is parting.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By 305coco in forum Yamaha ClassifiedsReplies: 4Last Post: 06-26-2008, 10:13 AM
By earthshaker in forum Kawasaki ClassifiedsReplies: 2Last Post: 05-19-2008, 11:36 AM
By Pags in forum Sea Doo ClassifiedsReplies: 1Last Post: 04-25-2008, 06:45 PM
By rxtmike in forum 4-Tec PerformanceReplies: 1Last Post: 03-31-2008, 04:19 PM
By Matth3wJL in forum 4-Tec PerformanceReplies: 1Last Post: 06-13-2007, 12:38 PM