Thread: fuel pressure regulator
02-21-2009, 09:32 PM #1
fuel pressure regulator
what brand of regulator is used in the rising rate fuel pressure regulator kits ( rrfpr )
im building my own setup right now.
i bought the tank fitting (distribution block) from Turbo Tech and was going to use an aeromotive regulator 13109 but i think i might use a professional products 10670. the pro products has npt threads so i can use cheap brass fittings which is a plus. im trying to keep this low budget.
i have used the aeromotive regulator before and it is a quality piece. both regulators are a 1:1 boost reference.
what do you guys think.
also i found a place that sells the regulator for $75
here is the specs for both
here is the distribution block
02-21-2009, 09:57 PM #2
update: I did find out that the turbosmart is good to 70lb base pressure also. You should never need to set a base over 70 anyhow. At first I diddnt realise thes ratings were refering to base pressure.
02-21-2009, 10:41 PM #3
02-21-2009, 10:51 PM #4
02-21-2009, 11:18 PM #5
02-21-2009, 11:22 PM #6
02-21-2009, 11:37 PM #7
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Red Devil in forum 4-Tec PerformanceReplies: 8Last Post: 12-17-2007, 09:19 PM
By TCR in forum 4-Tec PerformanceReplies: 0Last Post: 07-27-2007, 12:48 AM
By novice_4 in forum 4-Tec PerformanceReplies: 24Last Post: 05-23-2006, 12:18 AM
By Pale Rider in forum 4-Tec PerformanceReplies: 15Last Post: 04-26-2006, 06:23 PM
By Pale Rider in forum 4-Tec PerformanceReplies: 3Last Post: 04-11-2006, 06:14 PM