Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1

    Arrow Fs or trade 2000 gp1300r new motor and lots of upgrades...

    ONLY $3500!! Needs finished. Motor does not have a second of running time.
    Hull is nice and has less than 60 hours of use. Trailer is clean. Title is clean and clear. Motor has new pistons and crank. New power valves. Shaved head. Sleeved cyls. Carbs have been rebuilt and re jetted per island racing specs. Sealed pump shoe. Riva tabs and plate. Works grate. Ect ect ect i bought a twin outboard skater which is my main priority at this point. I need to get it going before summer. The ski is just going to sit. I bought it stock last summer running and have put waaaayyy too much into it since. I don't want to part it out.
    Ski is located in St. Petersburg. No one has cash anymore and i know i can't get what i have in it so i am open to trades. James 727 235 3410
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC00001.JPG 
Views:	104 
Size:	151.3 KB 
ID:	118784   Click image for larger version. 

Name:	DSC00003.JPG 
Views:	181 
Size:	135.3 KB 
ID:	118785   Click image for larger version. 

Name:	DSC00002.JPG 
Views:	105 
Size:	121.3 KB 
ID:	118786   Click image for larger version. 

Name:	DSC00006.JPG 
Views:	541 
Size:	143.4 KB 
ID:	118787  
    Last edited by gpr727; 02-27-2009 at 10:10 AM.

  2. #2
    I would consider trading for a lifted 4x4 atv

  3. #3
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Long Island, NY
    i envy you!! good luck with the skater! did u buy one of the skaters off S&F or anything?

    i am on the edge of my seat wanting to pull the trigger on a 24' skater (would love a 28 if they weren't so expensive)... just trying to find a buyer for my 24 superboat...

    have hard so many horror stories about 24 skaters in the rough stuff which makes me nervous, i run in some rougher water on Long Island pretty often... so up in the air about it for safety reasons, and it's gonna be hard to give up a cabin for overnight stays

    good luck with the boat!

    and good luck with the sale of ur ski...

  4. #4
    Thanks bro! I've heard all the good and bad. I'm going to take my chances with it. Definitely can't afford a bigger boat. I bought the one I showed you down here in FL. I've ripped the entire boat apart and I'm redoing the interior, gauges, rigging, cowls and some paint...

    You know everyone has their own opion on these boats. Most of them can't afford it or can afford to buy a 30+ cat! I'm not going to be running 100mph everywhere but I'll be cruizing at 80... It will out handle any boat 24 and under at the same speed. Any boat can dangerous at 60+ in really rough water. I'd say buy it! Dollar for dollar you can't get a faster, better built boat! If not you could upgrade your motor with cut heads and 300promax intake and electronics

  5. #5
    she's gettin there! I sold my Apache off the Virgin Islands. Guy wired me the full amount and I just had to take it to the port. guys in the islands LOVE SOB's and have cash !
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	1235344147968.jpg 
Views:	72 
Size:	289.9 KB 
ID:	119053   Click image for larger version. 

Name:	1234207276262.jpg 
Views:	78 
Size:	383.3 KB 
ID:	119054   Click image for larger version. 

Name:	1232890938466.jpg 
Views:	87 
Size:	357.0 KB 
ID:	119055  

  6. #6
    Better pics
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC00007.JPG 
Views:	68 
Size:	152.1 KB 
ID:	119322   Click image for larger version. 

Name:	DSC00008.JPG 
Views:	66 
Size:	152.8 KB 
ID:	119323   Click image for larger version. 

Name:	DSC00012.JPG 
Views:	64 
Size:	137.1 KB 
ID:	119324   Click image for larger version. 

Name:	DSC00011.JPG 
Views:	68 
Size:	145.8 KB 
ID:	119325  

  7. #7
    North Carolina Hoovermaneuver's Avatar
    Join Date
    Apr 2005
    Benson, NC.
    What needs to be finished?

  8. #8
    The motor was just rebuilt and put back into the hull. In the pic you can see everything is there. Fuel lines need to be hooked up and some bolts need to be tightened. A lot of people want this thing for $1500... Looks like I may be parting it out while the parts are still new

  9. #9
    Ya Boy Trevor bajaeater's Avatar
    Join Date
    Dec 2005
    these are 1300 jugs on there. are they ported? carburated?

  10. #10
    They are stock cyls. Not ported. Stock carbs, just rebuilt, blocked accelerator pump and re jetted by island racing

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New Motor 2000 Polaris pro 1200
    By rdizz81 in forum Polaris Open Discussion
    Replies: 33
    Last Post: 07-30-2010, 02:12 PM
  2. FS 2000 GP1300R Lowell Gas Valve Motor
    By a1965gt in forum Yamaha 2 Stroke Skis
    Replies: 22
    Last Post: 07-26-2010, 02:41 PM
  3. Replies: 5
    Last Post: 06-29-2010, 11:49 AM
  4. FS/WTT 25' four winns with brand new motor and outdrive
    By Alex13 in forum General Classifieds
    Replies: 0
    Last Post: 11-26-2008, 11:18 PM
  5. New motor or sell hull and trailor?
    By gixxer92 in forum Yamaha Old School Skis
    Replies: 27
    Last Post: 05-19-2008, 05:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts