Results 1 to 9 of 9
  1. #1
    jonny5's Avatar
    Join Date
    Aug 2005
    Location
    Redding, CA
    Posts
    1,266
    +1
    5

    Show me your dump nozzle setup's

    Im wondering if some people can show how they hooked up there dump nozzles on the stxr/15F 's heck even the ultra 250's.

    I wondering what it looks like going thru the hull. I just got my cable and not exactly what I was thinking when I got it.

    So some pics of the transom and maybe in side would be nice and cable hook up.

    Ok well thanks


  2. #2
    Im interested too they are pretty pricey not to see what it looks likeinstalled

  3. #3
    jonny5's Avatar
    Join Date
    Aug 2005
    Location
    Redding, CA
    Posts
    1,266
    +1
    5
    Mines done I will post some pics soon... Not many have them I guess.

  4. #4
    jonny5's Avatar
    Join Date
    Aug 2005
    Location
    Redding, CA
    Posts
    1,266
    +1
    5
    Heres a pic of the Sato/speed magic dump nozzle that I got.... and just installed. I drilled a half inch hole for the cable and then put the groumet in and slid the cable thru. Havent hooked it to the bars yet as I havent gone and got a lever but soon.

    It is actually a striaght exit nozzle verses the stxr/15F 12 F nozzle are about 3 to 5 degree's up.. It does share the same exit diameter though of 82mm. But that can be changed with differant rings.

    Which might scrub a little speed in the glass water but in race condtions will only make it faster and also improve tight bouys turns making it to where you can come in hotter.

    I also cut about 3/4 off the nozzle since it actually would jerk the bars when I would make a hard turn and pin it. Which in turn could bend the steering nozzle also a little bit of grinding was done to the ride plate where the bottom bolt was for clearance issues.. not bad though. I bet a R&D plate would not need any grinding.

    here ya go..






  5. #5
    Team N2L #112 *Monster 15FKawi*'s Avatar
    Join Date
    Jun 2008
    Location
    Cayman Islands
    Posts
    154
    Jonny the SpeedMagic setup looks good. i agree it would probably srcub some glass water speed,but the hook-up & handling in chop is a great advantage. +1
    when you going to test bro?

    btw: can the Skat-Trak AutoDrop be used without the Magnum Pump.?

  6. #6
    jonny5's Avatar
    Join Date
    Aug 2005
    Location
    Redding, CA
    Posts
    1,266
    +1
    5
    I dont so I was looking at one and they would bolt up but the overlap or lip I think is way off ...I know my gpr was like this but it could have been machined off but didnt want to get the nozzle and find out it wont work.

    Hopefully this weekend I will get final tunning and numbers with about 3 nozzles..

    But will see I have family things going this weekend to

  7. #7

    Join Date
    Apr 2007
    Location
    Lake of the Ozarks
    Posts
    187
    Just got off ebay. Has 84mm open
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	!BNUguNg!mk~$(KGrHgoOKjQEjlLmWWZMBJpCiVFucg~~_1.jpg 
Views:	65 
Size:	17.3 KB 
ID:	120918  

  8. #8
    jonny5's Avatar
    Join Date
    Aug 2005
    Location
    Redding, CA
    Posts
    1,266
    +1
    5
    probably off a 15F SC with that 84mm opening....

    I was looking at that to....
    I still need your wedge.

    I would cut the nozzle or get a heavy duty I bent my cable about 5 mins into it after I cut it...still jerks like crazy....I just cut a little more so will see if that does it.

  9. #9

    Join Date
    Apr 2007
    Location
    Lake of the Ozarks
    Posts
    187
    Well, I gotta find out what my wedge is, I think 2mm. problem is it is on my dock and I will be away for a week or so. The reason I took it out is the lake I live on is rough, VERY rough, as in the worst in-land water way, as listed by the coast guard (great lakes excluded), and I was having trouble out running 12f's cause the weight they have could handle the water better.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Show me your turbo intakes/filter setups
    By Stockrxp in forum 4-Tec Performance
    Replies: 1
    Last Post: 12-12-2011, 12:18 PM
  2. Show me your fuel filters
    By NJJer in forum Yamaha Old School Skis
    Replies: 13
    Last Post: 04-06-2009, 06:57 PM
  3. Cheap Dump Nozzle setup 4 stx/stxr/12-15F
    By jonny5 in forum Kawasaki Classifieds
    Replies: 8
    Last Post: 03-02-2009, 05:13 PM
  4. show me your pissers (water dump outlets)
    By spaceman in forum Yamaha PWC Performance (2-stroke)
    Replies: 11
    Last Post: 12-09-2008, 03:49 AM
  5. Show me your Seat COVERS!!!!
    By Chrisrokc in forum Yamaha PWC Performance (2-stroke)
    Replies: 37
    Last Post: 11-09-2006, 11:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •