Results 1 to 5 of 5
  1. #1
    WVGP1200R's Avatar
    Join Date
    Apr 2006
    Location
    Winfield, WV
    Posts
    231
    +1
    14

    Pump/Prop Install??

    I have an 02 gp. I bought the 05 pump conv. for it and I am having trouble with the prop removal. I got the pump out but am unable to figure out how to remove the old pump from the driveshaft. I got the bolt off the rear, but dont know where to go from here. Also my old impeller has the bolt pattern on the nose of the prop. My new one doesnt. How does this change my install?? I guess I dont understand it because I havent got it apart yet. Does the old pump just slide off the shaft then then old impeller screw off then??? How does the new one go together?? Any help will be really great. Thanks


  2. #2
    Like a chimp with a ball-peen hammer smackwave's Avatar
    Join Date
    Dec 2005
    Location
    Annapolis, MD
    Posts
    621
    +1
    22
    You'll need to use a press to get the old shaft out. For the new pump press the front bearings on the driveshaft, press the bearing and driveshaft into the pump, press the spacer into the pump, then press the rear bearing onto the shaft and into the pump. It's important to have the correct size driver to press against the inside and outside races, and it may be worth it to take the old pump and new parts to a dealer and pay them an hour's labor to do it.

    For the new prop you should have received a prop install tool that slides into the front of the prop to tighten or loosen it. The billet nose cone then slides into the same space.

  3. #3
    WVGP1200R's Avatar
    Join Date
    Apr 2006
    Location
    Winfield, WV
    Posts
    231
    +1
    14
    Carl at IR had already pressed the bearings in for me when I bought the pump. So I have the new bearings in the new pump and I have greased them.

  4. #4
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23

    Impeller Installation Install

    Here are some good links that Cajundude has on his website for the impeller installation.

    impeller install
    http://www.cajundude.com/jetpumpremovalimpeller.htm


    pump removal
    http://www.cajundude.com/jetpumpremovalimpeller.htm



    Also, welcome to the Forum

  5. #5
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23
    oops ! good catch ! I'll relink it. Thanks Scott

    Here it is

    impeller install
    http://www.cajundude.com/impellerinstall.htm

    pump removal
    http://www.cajundude.com/jetpumpremovalimpeller.htm

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Prop install fun/complications
    By mcrowley in forum 4-Tec Performance
    Replies: 7
    Last Post: 09-04-2007, 11:08 PM
  2. Pump Wedge Install Question
    By BLACKSTI in forum Kawasaki PWC Performance (4-stroke)
    Replies: 6
    Last Post: 08-28-2007, 05:30 PM
  3. pump shoe install ?'s
    By slow1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 06-29-2007, 01:16 AM
  4. 05 pump/prop set-up
    By DaGoblinEatR in forum Yamaha PWC Performance (2-stroke)
    Replies: 16
    Last Post: 06-22-2006, 11:30 AM
  5. What a dumb question this is...Prop Install
    By FSTGPR in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 04-19-2006, 12:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •