Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    Addicted Member 5001craig's Avatar
    Join Date
    Jul 2007
    Location
    Northeast Indiana
    Posts
    2,924
    +1
    11

    Need parts: '93 750SX Standup

    I recently purchased a '93 Kawi 750SX standup pretty cheap. Everything looks pretty good but the Handle Pole is cracked and has been patched with diamond plate and rivets (for a little BLING-BLING). I'd like to just get a different Handle Pole and replace mine with one without a patch.

    The aluminum bracket that apears to hold the handle pole in the up position is broke--need one of those too.

    Also, I was told I need a starter but can probably get mine rebuilt locally.

    Anyone have parts for one of these, let me know.

    Thanks.


  2. #2
    seaobin's Avatar
    Join Date
    Jun 2007
    Location
    Raleigh, North Carolina, United States
    Posts
    1,573
    +1
    1
    cant help on the fiberglass pieces, but a question for you?

    1 hr labor
    new seals and bearings
    local shop time
    drive back and forth

    Buy a starter on Ebay, New and less than $100 bucks

    http://cgi.ebay.com/ebaymotors/NEW-K...ssoriesQ5fGear

  3. #3
    Addicted Member 5001craig's Avatar
    Join Date
    Jul 2007
    Location
    Northeast Indiana
    Posts
    2,924
    +1
    11
    Quote Originally Posted by seaobin View Post
    cant help on the fiberglass pieces, but a question for you?

    1 hr labor
    new seals and bearings
    local shop time
    drive back and forth

    Buy a starter on Ebay, New and less than $100 bucks

    http://cgi.ebay.com/ebaymotors/NEW-K...ssoriesQ5fGear
    Thanks for the heads-up on the starter off ebay.

    I was sure it would be cheaper to have mine rebuilt locally but found it was going to be a minimum of $100 and possibly $120 for labor and the rebuild kit. Bought the one off ebay for $89.95 to the door.

    Now just need to find those other parts... Anyone know where I can get them.

    Thanks.

  4. #4
    seaobin's Avatar
    Join Date
    Jun 2007
    Location
    Raleigh, North Carolina, United States
    Posts
    1,573
    +1
    1
    post some pics of the parts you need, I do not understand the Aluminum piece that holds the handle pole up. Do you mean the hinge bracket.

    Fix the pole, Glassing is pretty easy to do

  5. #5
    Addicted Member 5001craig's Avatar
    Join Date
    Jul 2007
    Location
    Northeast Indiana
    Posts
    2,924
    +1
    11
    Quote Originally Posted by seaobin View Post
    post some pics of the parts you need, I do not understand the Aluminum piece that holds the handle pole up. Do you mean the hinge bracket.

    Fix the pole, Glassing is pretty easy to do
    The ski is upside down now and I am repairing some holes that were in the hull. As soon as I flip it back over, I will post some pics.

    Until then, the aluminum part is by the hinge but not the hinge. It's the part that the spring goes into to help the handle pole stay up.

    I found a handle pole on this site that was $65 and bought it. I didn't think that was too bad.

    Thanks for the help.

  6. #6
    Addicted Member 5001craig's Avatar
    Join Date
    Jul 2007
    Location
    Northeast Indiana
    Posts
    2,924
    +1
    11

    Still need a part...

    Quote Originally Posted by 5001craig View Post
    The ski is upside down now and I am repairing some holes that were in the hull. As soon as I flip it back over, I will post some pics.

    Until then, the aluminum part is by the hinge but not the hinge. It's the part that the spring goes into to help the handle pole stay up.

    I found a handle pole on this site that was $65 and bought it. I didn't think that was too bad.

    Thanks for the help.
    Anyone have the part described above?

  7. #7
    seaobin's Avatar
    Join Date
    Jun 2007
    Location
    Raleigh, North Carolina, United States
    Posts
    1,573
    +1
    1

  8. #8
    axgrider73's Avatar
    Join Date
    Feb 2007
    Location
    Southeast Ohio
    Posts
    2,059
    John Zigler is a good source for used parts. His link is in my signature.

  9. #9
    Addicted Member 5001craig's Avatar
    Join Date
    Jul 2007
    Location
    Northeast Indiana
    Posts
    2,924
    +1
    11
    Quote Originally Posted by axgrider73 View Post
    John Zigler is a good source for used parts. His link is in my signature.
    Thanks for the info.

    I am trying to contact him.

  10. #10
    Addicted Member 5001craig's Avatar
    Join Date
    Jul 2007
    Location
    Northeast Indiana
    Posts
    2,924
    +1
    11

    Need part number 11047 A/B

    Quote Originally Posted by 5001craig View Post
    Thanks for the info.

    I am trying to contact him.
    I tried John and he said he doesn't have any of the parts I need for the Handle Pole for my '93 750 SX standup.

    I am looking for the part that holds the Handle Pole in the up position for access to the engine compartment/cover. I believe the part number is 11047 A/B (bracket) and the lever that swings up and over to lock the Handle Pole in the up position. The bracket is broke and there is nothing to flip up and over.

    Thanks, Craig

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Jerry, I'm home and need parts!!
    By ArmyRXP in forum 4-Tec Performance
    Replies: 5
    Last Post: 06-05-2007, 03:31 PM
  2. if I need parts for a 04 MSX 110 WHERE!!
    By f150vtx in forum Polaris Open Discussion
    Replies: 6
    Last Post: 05-07-2007, 08:57 PM
  3. need Part # for RXP driveshaft holding tool
    By rapidacceleration in forum 4-Tec Performance
    Replies: 3
    Last Post: 04-25-2007, 09:55 PM
  4. HELP NEEDED ASAP!! need part numbers from those with service manuals please
    By cue03 in forum Kawasaki PWC Performance (4-stroke)
    Replies: 7
    Last Post: 03-17-2007, 05:12 PM
  5. need part # for black bumper rail that will fit '06 RXP
    By TorquePhoto in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-26-2006, 09:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •