03-08-2009, 05:41 PM #1
I have seen mentioned that you can use Bondo to fill your ride plate holes instead of the epoxy. Has anyone done this with no issues?
03-08-2009, 05:43 PM #2
03-08-2009, 05:51 PM #3
- Join Date
- Mar 2008
i used bondo the only drama was one of the bondo plugs fell out the hole...let it dry and sand back with electric sander
03-08-2009, 05:54 PM #4
I use Bondo. I learned this from Spud. Let it dry, sand smooth. My pump shoe holes have been filled for the past 4 years and not one let go. Clean and Scuff the inside of the holes so it can stick well.
I use the plastic type bondo body filler. dirt cheap. dries hard.
03-09-2009, 12:22 AM #5
I used Bondo too. No problems after 2 years... Ron
03-09-2009, 09:24 AM #6
I have never hear of this before but I will have to try it.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
FS Bondo-hairBy rangermtb5 in forum General ClassifiedsReplies: 0Last Post: 10-16-2011, 06:23 PM