Thread: Looking to buy a gp1300r
03-11-2009, 03:10 PM #1
- Join Date
- Mar 2009
Looking to buy a gp1300r
Can any owners list the year/hours and any problems theyve had with them(if any) and if you had mods done or not..
03-11-2009, 03:15 PM #2
2007 with 86 hours. cylinders were shipped for porting. prior to that i had zero complaints and zero trouble. if you maintain the ski it will run for a long time.
03-11-2009, 03:35 PM #3
2007 GPR with 185 hrs cylinders off getting ported, replacing pistons and rings, I'm told the pistons usually are good for 100 hrs. Make sure you get the pump tunnel reinforced and an aftermarket intake grate to start.
Mods on my ski: Raised compression, riva tuner, 4 degree timing key, reeds, D plate, Riva filter, Solas impeller, Intake grate, and custom ride plate, All installed and tuned by WFO.
03-12-2009, 09:41 PM #4
2005 gpr 37.5 hours stock for $4.500 obo my#813 235 8230
03-13-2009, 07:29 AM #5
THe 03 is the only ski that Had a defect, The pump shoe needed to be upgraded. this was the first year of the lighter hull. if you get a 05 or later you don't have power valves that are prone to failure. but power valves are called that for a reason.
03-13-2009, 07:31 AM #6
03-14-2009, 11:01 PM #7
2003 and 64 hours no problem until now
03-14-2009, 11:04 PM #8
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Rodneyae in forum Polaris Open DiscussionReplies: 28Last Post: 06-09-2007, 06:17 PM
By Thameth in forum SoutheastReplies: 2Last Post: 01-31-2007, 09:25 PM
By Thameth in forum Yamaha Open DiscussionReplies: 8Last Post: 01-29-2007, 08:31 PM
By Stiff1 in forum Yamaha Open DiscussionReplies: 7Last Post: 01-27-2007, 04:44 PM
By GGIII in forum Sea Doo Open DiscussionReplies: 2Last Post: 07-18-2006, 12:41 PM