Thread: Charging system question?
05-19-2006, 10:45 PM #1
Charging system question?
If I want to check the charge going in to the battery, if I put my meter in line after the ski is running to the negative side of the battery. How many amps should I get. say at 2000 rpms? 3.18?
05-19-2006, 11:14 PM #2
According to the manual:
Lower limit voltage @2,000 r/min, Volts = 7.9
Voltage Regulator Lower limit voltage output @2,000 r/min, Volts = 12.6
Minimum charging current @ 6,000 r/min, AMPS = 9
so, yes I would think at 2,000 rpm you should see about 3 amps
05-19-2006, 11:29 PM #3
Yes I was reading the manule but just didn't get the 9amps @ 6000 rpms. I would not do that to my engine on hose. I don't suspect a problem. Just gathering data... ok I was screwing around. but it was cool to learn..
05-19-2006, 11:39 PM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By 1fastrat in forum 2-Stroke PerformanceReplies: 4Last Post: 07-28-2007, 05:58 PM
By mudd in forum Polaris How To & FAQsReplies: 1Last Post: 12-20-2006, 12:34 PM
By tomgtv in forum 2-Stroke PerformanceReplies: 4Last Post: 11-14-2006, 08:16 PM
By GeoRXT in forum Sea Doo Open DiscussionReplies: 6Last Post: 05-21-2006, 10:20 AM
By jitees in forum 4-Tec PerformanceReplies: 2Last Post: 03-31-2006, 01:56 PM