Thread: Air Intake Mod Question
03-17-2009, 07:21 AM #1
Air Intake Mod Question
For those of you that have removed your stock front air intake for the Kanaflex or whatever intake mod you have done - did you completely remove the entire 3 piece airbox assembly?
I know I need to relocate the rectifier and deal with the catch can for the intake. What I am wondering is if the rubber straps are still tight enough to retain the gas tank, or not???? Seems like I would need a shorter strap..
03-17-2009, 07:28 AM #2
Some have used a section of pvc pipe to takeup the slack in the tank straps... Ron
03-17-2009, 08:41 AM #3
03-17-2009, 09:12 AM #4
I did nothing but hook my straps back up after taking out the OEM airbox..Havent had any problems at all with it like that...
03-17-2009, 09:16 AM #5
03-17-2009, 09:21 AM #6
- Join Date
- Jul 2007
- Montgomery, AL
I used a 14" long piece of 4" PVC and it fit just right.
03-17-2009, 09:35 AM #7
yes i measured a peice of 4" pvc pipe, and slid it in there. worked great.
i also mounted my rectifier to the pvc with some, self tapping sheet metal screws, still on tight after 1 year.
03-17-2009, 11:01 AM #8
03-17-2009, 11:10 AM #9
03-17-2009, 12:27 PM #10
- Join Date
- Aug 2007
- Sparrows Point, MD (near the Key Bridge)
I did this:
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Skips313 in forum Kawasaki PWC Performance (4-stroke)Replies: 7Last Post: 06-05-2007, 01:04 AM
By TM1 in forum Sea Doo Sport BoatsReplies: 4Last Post: 03-17-2007, 11:36 AM
By holdnon72 in forum 4-Tec PerformanceReplies: 3Last Post: 02-24-2007, 10:06 PM
By cyoungesq in forum Sea Doo Sport BoatsReplies: 4Last Post: 06-05-2006, 05:27 PM
By Green Hulk in forum 4-Tec PerformanceReplies: 38Last Post: 06-23-2005, 11:53 PM