Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 39
  1. #1

    Oh my friend Benjahw your ordeal is almost over.

    All new crank seal
    All new Crank Bearings
    All new Rod bearings
    All new crank washers
    All new 08 Pistons
    All new Piston rings
    All new Piston pins
    All new Valve seals
    All new gaskets
    New drive Shaft and Coupler
    New Oil pressure switch
    New Oil pump complete.
    New Oil pump chain, yours had rust.
    New 08 Crank case kit upgrade
    New 08 Stock Valve Block Offs
    Upper Case drilled inside for ventilation, no peaking either.
    Rebuilt head and reseated Valves
    Completely rebuilt & tested IC.
    Crank was Micro Polished
    Outside of block Bead Blasted and refinished.

    Everything was done to absolute perfection my friend.
    Click image for larger version. 

Name:	IMG_7284.JPG 
Views:	83 
Size:	2.63 MB 
ID:	121949

    Click image for larger version. 

Name:	IMG_7209.JPG 
Views:	134 
Size:	2.70 MB 
ID:	121950

    Click image for larger version. 

Name:	IMG_7279.JPG 
Views:	87 
Size:	2.66 MB 
ID:	121953

    Click image for larger version. 

Name:	IMG_7280.JPG 
Views:	68 
Size:	2.72 MB 
ID:	121954

    Click image for larger version. 

Name:	IMG_7281.JPG 
Views:	62 
Size:	2.09 MB 
ID:	121955

    Click image for larger version. 

Name:	IMG_7282.JPG 
Views:	72 
Size:	2.53 MB 
ID:	121956

    Click image for larger version. 

Name:	IMG_7283.JPG 
Views:	61 
Size:	2.94 MB 
ID:	121957

    Click image for larger version. 

Name:	IMG_7285.JPG 
Views:	63 
Size:	2.83 MB 
ID:	121958


  2. #2
    JET250's Avatar
    Join Date
    Jan 2008
    Location
    Australia mate fair dinkum.
    Posts
    1,278
    +1
    2
    that looks tasty. just like mine will be soon cept faster.

  3. #3
    Been around for years...seen it all Kawi-Guy's Avatar
    Join Date
    Oct 2006
    Location
    Naples Florida
    Posts
    828
    +1
    27
    Looks great Skip......Benjahw......... when you going up there???

  4. #4
    Just A Few Bucks!! Gj#6's Avatar
    Join Date
    Jan 2007
    Location
    Cayman Islands
    Posts
    762
    Upper Case drilled inside for ventilation, no peaking either.

    Are you talking about the way macc does?any pics ? Notice the project 260 any updates on that?

  5. #5
    Take the time to smile sirbreaksalot's Avatar
    Join Date
    Jun 2007
    Location
    Brisvegas
    Posts
    4,157
    +1
    598
    Quote Originally Posted by Gj#6 View Post
    Upper Case drilled inside for ventilation, no peaking either.

    Are you talking about the way macc does?any pics ? Notice the project 260 any updates on that?
    NO PIC"S allowed buddy. unless you got NASA cleaance Level 1 buy the sounds of it GJ

  6. #6
    JET250's Avatar
    Join Date
    Jan 2008
    Location
    Australia mate fair dinkum.
    Posts
    1,278
    +1
    2
    Quote Originally Posted by sirbreaksalot View Post
    NO PIC"S allowed buddy. unless you got NASA cleaance Level 1 buy the sounds of it GJ

    send him a pic of mine....oops thats a secret too.

  7. #7

    Join Date
    Mar 2007
    Location
    Cairns Australia
    Posts
    234
    Nice looking engine,...all it needs is the rocker cover to be painted red! Whats with the busted armadillo?

    Cheers

    Chris.

  8. #8
    Take the time to smile sirbreaksalot's Avatar
    Join Date
    Jun 2007
    Location
    Brisvegas
    Posts
    4,157
    +1
    598
    Quote Originally Posted by Skips313 View Post
    All new crank seal
    All new Crank Bearings
    All new Rod bearings
    All new crank washers
    All new 08 Pistons
    All new Piston rings
    All new Piston pins
    All new Valve seals
    All new gaskets
    New drive Shaft and Coupler
    New Oil pressure switch
    New Oil pump complete.
    New Oil pump chain, yours had rust.
    New 08 Crank case kit upgrade
    New 08 Stock Valve Block Offs
    Upper Case drilled inside for ventilation, no peaking either.
    Rebuilt head and reseated Valves
    Completely rebuilt & tested IC.
    Crank was Micro Polished
    Outside of block Bead Blasted and refinished.

    Everything was done to absolute perfection my friend.
    Click image for larger version. 

Name:	IMG_7284.JPG 
Views:	83 
Size:	2.63 MB 
ID:	121949

    Click image for larger version. 

Name:	IMG_7209.JPG 
Views:	134 
Size:	2.70 MB 
ID:	121950

    Click image for larger version. 

Name:	IMG_7279.JPG 
Views:	87 
Size:	2.66 MB 
ID:	121953

    Click image for larger version. 

Name:	IMG_7280.JPG 
Views:	68 
Size:	2.72 MB 
ID:	121954

    Click image for larger version. 

Name:	IMG_7281.JPG 
Views:	62 
Size:	2.09 MB 
ID:	121955

    Click image for larger version. 

Name:	IMG_7282.JPG 
Views:	72 
Size:	2.53 MB 
ID:	121956

    Click image for larger version. 

Name:	IMG_7283.JPG 
Views:	61 
Size:	2.94 MB 
ID:	121957

    Click image for larger version. 

Name:	IMG_7285.JPG 
Views:	63 
Size:	2.83 MB 
ID:	121958
    How can you get me that armed dildo, I want it taxidermeeded and put it above my work deck, That would be so cool........ wonder wot customs will say

  9. #9
    L Carlson's Avatar
    Join Date
    Aug 2007
    Location
    Bonita Springs, Florida, United States
    Posts
    7,118
    +1
    2
    Nice work skip! When is it going to be up and running? Lee

  10. #10
    The drilling of the cases is not something for the rec rider to do. Even the mild racer does NOT need it.

    What it is, is something we have been doing since 05 on the 15F/SC units. Just helps calm down the oil and give the ventilation passage of the blow by a short cut to the valve train.

    At the moment I can not openly share the info, as for what is done by Macc Racing? I would'nt know as I have never had Chris do one for me. I can only suspect he is doing the same or better as he has many many years dealing with Kawasaki directly. I'm sure he has seen a few things we will never see.

    Trust me once I get the OK then Im all about sharing but for the time being its not mine to openly share.

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Salmon Season is almost over here in Northern CA.
    By Butler in forum Videos & Pictures
    Replies: 0
    Last Post: 09-04-2012, 01:11 PM
  2. Hey guys my 2nd seat is almost done take a look.
    By mikegpr03 in forum Yamaha PWC Performance (2-stroke)
    Replies: 46
    Last Post: 03-21-2012, 04:00 PM
  3. My friend Jeremy Hoyland-keep him in your thoughts
    By shawn alladio in forum High Performance Watercraft Safety
    Replies: 77
    Last Post: 01-29-2012, 04:50 PM
  4. This is why you don't let friends ride your ski
    By WBoulton in forum 4-Tec Performance
    Replies: 17
    Last Post: 06-10-2011, 11:06 PM
  5. Got past my break in and this is what I got!
    By Water4fire in forum 4-Tec Performance
    Replies: 12
    Last Post: 05-20-2005, 07:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •