Thread: Engine Swap Question
03-20-2009, 09:38 AM #1
Engine Swap Question
I have an 03 GTXsc with a bad 185 engine. I have access to an 05 215 complete with harness and all sensors. Will I have to change the ECM and have anything reprogrammed. I am also considering doing this swap on an 05 155na boat as well. Any help would be greatly appreciated.
03-20-2009, 12:38 PM #2
Take a look at jpeconsults thread about upgrading a 185-hp engine to a 215-hp engine. IIRC, assuming that you have a complete 215-hp engine you will need at least the ECU w/lanyards, driveshaft/pump/impeller, FPR, and exhaust system (if you want to remove the '03 2-waterbox system). I might have left some things out. Jeremy, help me out... Ron
03-20-2009, 01:22 PM #3
I figured the prop would have to be repitched. Is the drive shaft different? Will the stock waterbox work? I know its not the best but can we use it? Does the fuel pressure reg have to be changed?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By cfnnslsq in forum 2-Stroke PerformanceReplies: 2Last Post: 05-03-2011, 06:52 PM
By pipsr09 in forum 2-Stroke PerformanceReplies: 2Last Post: 10-21-2010, 05:28 PM
By aprilia-ryan in forum Polaris ProjectsReplies: 5Last Post: 08-11-2009, 06:38 AM
By jofroo in forum Yamaha Old School SkisReplies: 3Last Post: 06-24-2009, 09:24 PM
By SLOANMAN in forum Polaris Open DiscussionReplies: 13Last Post: 06-03-2008, 10:25 PM