03-21-2009, 02:12 PM #1
F/S: Conversion ready 2000 GPR Hull
2000 GPR hull- good condition, all white w/ silver trim, no stickers
-mid wall removed
-gas tank removed
-midshaft bearing housing mounting area sanded flat
-fiberglassed pump tunnel reinforcement
-middle hull cut made for conversion
-side hull cut will need to be made
-middle hull cut filled in and fiberglassed over
-stock intake grate
-pump shoe- filled already
-all throttle and trim cables
-stock stepped sponsons
-midshaft bearing housing mount cut out of mid wall
-UMI bars- polished
-Fly Racing billet finger throttle- polished
This is basically a complete hull. I think I have a midshaft bearing housing that I can include. Also, a stock seat with a silver cover. The cover is dirty and may have a couple small tears. I haven't looked at the seat in a while since it's high up in the garage..
Asking $1000. I'll travel to meet or deliver the ski. Up to an 1 1/2 each way for free. Anything further will have to be negotiated. The hull comes with a bill of sale and transferable registration.
All you need for a running conversion setup is the 4-tec parts, an aftermarket plate, grate, the conversion driveshaft, waterbox, and the other custom parts. The only reason I'm selling it is because my plans to build a 2nd conversion ski fell apart.
The only issue with the hull is the plastic thru-hull fitting where the pump shaft comes into the hull. It has a crack and a piece missing. The part # to fix it is F0X-U883E-00-00 and it only costs $12.84.
Please PM me with interest.
Last edited by JFizzleJR; 04-18-2009 at 09:14 AM. Reason: sold
03-25-2009, 06:00 AM #2
03-27-2009, 02:28 PM #3
03-27-2009, 09:25 PM #4
All PM's replied. I will get pics up as soon as possible. I am out of town for a few days.
03-30-2009, 04:16 PM #5
Here are pictures as promised. As it is now the hull is outside, but covered. It come with more parts than pictured. The other parts are in boxes and bags. It also comes with a front storage bucket. It's easier to put the ski together when the hull is almost as bare as can be. It is in clean condition on the outside and some chemicals could easily clean up the inside. I will clean the inside if I happen to get over to West Marine before the hull sells.
Last edited by JFizzleJR; 04-01-2009 at 10:33 AM. Reason: sp
04-01-2009, 05:05 AM #6
hi james just wanted to know if the ski is still 4sale
04-01-2009, 10:31 AM #7
04-02-2009, 05:32 AM #8
would it be hard for you to get the hull to jason (hydrojunkie)???
04-02-2009, 03:20 PM #9
Hi Dean, I'm going there this Sunday most likely. It shouldn't be very difficult. The only problem is I would have to take my RXP off my double trailer and bring the double instead of a single..We'll figure it all out.
04-13-2009, 10:26 AM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Shibby1485 in forum Conversion Skis ClassifiedsReplies: 4Last Post: 08-13-2008, 02:55 PM
By Shibby1485 in forum Yamaha ClassifiedsReplies: 4Last Post: 08-09-2008, 01:12 PM
By shooter98xpl in forum Yamaha ClassifiedsReplies: 6Last Post: 05-08-2008, 04:14 PM
By shooter98xpl in forum Conversion Skis ClassifiedsReplies: 1Last Post: 01-30-2008, 06:46 PM
By KirkF350 in forum Conversion Skis ClassifiedsReplies: 0Last Post: 11-01-2007, 10:18 PM