03-26-2009, 02:57 PM #1
Conversions & Skat pumps "INFO needed."
Ok, boys I know eveyone has there opinions on pumps, but I would like to talk about Skat pumps on a conversion and see what props you are running so I may have a guide to help me out.
I am Running a 158 Skat 12 vein Set back and as of now have two Swirl props.
What do you guys run and what is the performance out of your Skat pump?
What can I espect?
Also anyone have a 158 Dynafly for sale?
03-26-2009, 05:34 PM #2
PM Oside Bill on the DF props..You may want to look @ the Spitfire thread I want to say they had a 12/18 in there when it had a rude s/c
03-26-2009, 05:48 PM #3
Now that I think about it....TheDome also had one a while back.
So you opened up the transom and extension to 158mm also ?
03-26-2009, 05:54 PM #4
03-26-2009, 05:58 PM #5
To hard to guess on what to expect out of the Swirl props, just thro em in there and see what ya got. Some of the root angles are different and perform very differently from one another with the same stamped number on it.
You don't need to, only needs to be bigger at the start of the prop hub where the water starts be under pressure. More then enough volume in front of the prop where there is no hub in the middle. The Yami pump tunnel is actually close to the same size as an RXP-X.
03-26-2009, 07:02 PM #6
Does the skat pump better than the seadoo pump in the GPR for Hole shot
03-26-2009, 07:03 PM #7
[quote=Duke;1000139]I think your going to be really happy with the 158 Skat!! Get ahold of Oside, he had a few 158 DF that were cut in the back to fit the Skat pump. Setback is much different.
To hard to guess on what to expect out of the Swirl props, just thro em in there and see what ya got. Some of the root angles are different and perform very differently from one another with the same stamped number on it. quote]
Duke I really hope so as I have spent a lot of cash on this skat pump that I really hope it is awesome, but I would be lying to you if I didn't say I would be upset if it was 3-5mph slower than a HO.
03-26-2009, 07:04 PM #8
OPPS. pics of pump and ring installed.
03-26-2009, 07:54 PM #9
03-26-2009, 08:00 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By BRING IT in forum Kawasaki PWC Performance (4-stroke)Replies: 12Last Post: 11-02-2011, 10:25 PM
By ABBOTT in forum Yamaha How To & FAQsReplies: 11Last Post: 02-04-2008, 06:46 PM
By Water4fire in forum 4-Tec PerformanceReplies: 10Last Post: 12-20-2007, 08:05 PM
By novice_4 in forum 4-Tec PerformanceReplies: 2Last Post: 05-03-2006, 10:06 PM
By MTD03sc in forum 4-Tec PerformanceReplies: 15Last Post: 04-20-2006, 08:05 AM