Results 1 to 5 of 5
  1. #1
    xyzyx00's Avatar
    Join Date
    Jan 2006
    Location
    indiana
    Posts
    212

    need carb settings

    my buddy took his ski out today, first time this season (with the guy he was gonna sell it to) only to find out he didnt do a very good job winterizing it again go im gonna clean out his carbs- again

    last year i set his carbs up a bit rich to be on the safe side- that and i hate taking that dam pipe off--

    if anyone could throw me some info on what the highs and lows should be set at with his mods, that would be great!

    flame arrestors
    reed stuffers
    free flow
    riva d-plate


  2. #2
    WATER WOODY's Avatar
    Join Date
    Aug 2005
    Location
    Minden, Nevada, United States
    Posts
    10,664
    +1
    11
    What is your current jetting ?

  3. #3
    ABBOTT's Avatar
    Join Date
    Jul 2005
    Location
    Birmingham, AL / Lay Lake
    Posts
    3,736
    +1
    96
    what kind of carbs are they??? Are they OEM stock??

    what size are they (44mm/46mm/48mm)??

    what kind of boat is it??

    how big is the engine 1200/1300/1400 ect ??

  4. #4
    xyzyx00's Avatar
    Join Date
    Jan 2006
    Location
    indiana
    Posts
    212
    oh, dangit- i guess i wansnt too clear about what boat it is- 2001 gpr, stock carbs ..... anyway just got back in from cleanin everything up, he was in a hurry so i just left everything as was-- #1 wasnt too bad, #2 was worse and #3 was horrible-- cleaned em all up, put everything back on in record time (4hours total!!) and the baby started right up!

  5. #5
    ABBOTT's Avatar
    Join Date
    Jul 2005
    Location
    Birmingham, AL / Lay Lake
    Posts
    3,736
    +1
    96
    ok - i am leaning towards your stock jetting then (for the mods you have).

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Polaris 1200 X 45 with Mikuni 44 taper bored Carbs Need Carb settings
    By Vagaondracing103 in forum Polaris PWC Performance
    Replies: 0
    Last Post: 03-08-2013, 12:00 PM
  2. Need carb settings for pro 785!
    By jcjw1998 in forum Polaris Open Discussion
    Replies: 3
    Last Post: 09-07-2010, 09:58 PM
  3. 1992 SL 650 carb settings? Spark Plugs needed?
    By Playtime in forum Polaris Open Discussion
    Replies: 5
    Last Post: 08-04-2007, 08:20 AM
  4. Need Carb settings/jetting for returning it back to stock
    By jgustman in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 02-04-2007, 02:43 PM
  5. Melted pistons - need carb setting advice
    By Byteme in forum Yamaha PWC Performance (2-stroke)
    Replies: 27
    Last Post: 12-29-2006, 01:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •