Thread: Stock Exhaust Block-off
03-30-2009, 11:37 PM #1
Stock Exhaust Block-off
What is everyone using to block off the stock exhaust hole when going to a rear exhaust?? I dont want some rubber plug and was thinking I would lay some fiberglass on the inside of the hull and then use a gel coat kit to color the outside to match OR find a aluminum piece and screw it over the hole on the outside. Any thoughts!!!
03-30-2009, 11:44 PM #2
03-30-2009, 11:46 PM #3
- Join Date
- Dec 2006
- Crest Hill, IL
All rear exhaust setups, even just the tips, come with a plastic insert that replaces the whole setup...Just unscrew the old stuff, pull out the elbow, insert the plug, and screw the nut on...SIMPLE
03-30-2009, 11:47 PM #4
Here's a pic of the riva block off.
03-31-2009, 12:39 AM #5
only problem is i bought all the stuff from different people but cant find anyone selling the plug and I need to get on the water soon.
03-31-2009, 09:15 AM #6
You can try calling Riva and see if they can sell you a block off seperatly...
03-31-2009, 09:35 AM #7
03-31-2009, 06:30 PM #8
got a free piece of aluminum sheet and will cut a block plate and post pics.
04-02-2009, 11:43 AM #9
So I know this is overkill and not the right way to glass in a hole but I figure with this on the inside and the hole glassed up and a plate on the outside with sealant it will be good and wont leak. I still need to find a table sander to make the plate even all the way around ( the dremel did its best) but you get the idea
04-02-2009, 04:38 PM #10
- Join Date
- Aug 2007
- Sparrows Point, MD (near the Key Bridge)
wow that looks like a lot of extra work over the plug that riva supplies
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
WTB - Parts stock exhaust block off plugBy STSPERFORMANCE in forum Sea Doo ClassifiedsReplies: 0Last Post: 08-23-2012, 07:30 PM
By gtile04 in forum Sea Doo ClassifiedsReplies: 1Last Post: 09-11-2011, 10:51 PM
By Ocman in forum Sea Doo ClassifiedsReplies: 0Last Post: 03-04-2010, 01:06 PM
By ctriverguy in forum Sea Doo ClassifiedsReplies: 7Last Post: 01-07-2009, 07:37 AM
By codymouse54321 in forum Sea Doo ClassifiedsReplies: 8Last Post: 04-30-2008, 04:33 PM