Thread: old school triple questions
04-06-2009, 10:28 PM #1
old school triple questions
Check out the stinger portion of the pipes......let me know if you have jets in the portion where the water sprays back into the pipes. If you have them what sizes are they?
04-07-2009, 04:25 PM #2
I used to use 180's and 170's.....
And you might have to re-tap the threads if they are buggered up or corroded.
04-07-2009, 06:55 PM #3
Mike what pipes had what jets were they all the same or all different
04-07-2009, 08:49 PM #4
I have 185 mains in the GP800 with twins. Keep in mind in the summer our water gets over 80
04-07-2009, 11:58 PM #5Ross at Factory pipe said they started to put 175-180 mains in. Then toward the end he said they were just putting any jet in and told the customer to change to their desired jet.
So, no clear answer just between 175-180.
04-08-2009, 12:20 PM #6
ok kris, i just checked out the triples i have that came of the 99 riva gpr there are no jets in any of the fittings but they do have strainers on the lines about where you would put a JW valve..can i run the strainers and the JW valve?
04-09-2009, 07:17 AM #7
I run 180's as well in my twin pipes on the 927. Pilo, yes you can run strainers as well as JW valves.....
04-09-2009, 07:31 AM #8
04-09-2009, 12:27 PM #9
thanks for your input, i bet its gonna look a little funny tho haha oh well
05-01-2009, 09:50 AM #10
Kris read the Factory pipe instructions
item 63 part # COMCRB0177 #177.5 Mikuni Main jet(on parts 7 9 @ 11)
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Flying Scotsman in forum Yamaha Old School SkisReplies: 170Last Post: 07-31-2012, 10:29 AM
By ISLANDRACING in forum Yamaha Old School SkisReplies: 77Last Post: 11-27-2007, 06:05 PM
By ISLANDRACING in forum Yamaha PWC Performance (2-stroke)Replies: 31Last Post: 07-26-2007, 05:37 AM
By Mongoose in forum Yamaha PWC Performance (2-stroke)Replies: 11Last Post: 02-15-2007, 08:04 AM
By 97GPSLEEPER in forum Yamaha Old School SkisReplies: 5Last Post: 02-07-2007, 12:37 PM