Thread: clogged injectors ?
04-07-2009, 10:50 AM #1
clogged injectors ?
Hi all, I was going to go premix after i have rebuilt my 2003 gp1300r, i have read mixed reports, some say all will be fine andr others say you can't go premix with fuel injection as it will clog the injectors.....!so whats right and whats wrong.....?
04-07-2009, 10:54 AM #2
Alot of people are running pre-mix no problems. Just gotta make sure the mixture is correct. I'm switching over to pre-mix real soon.
04-07-2009, 10:57 AM #3
My gpr has been premix now for over 100 hours with no issues... You do however have to use injector safe premix oil. Amsoil, klotz, and lots of other companies make injector safe oil.... I wont say which one is best because it will turn your thread into a 2,000 post debate
04-07-2009, 11:20 AM #4
I run pre-mix in my GPR and have no issues. I like the piece of mind of not having a problem with the oil injection system.
04-07-2009, 11:22 AM #5
hell, I have been running the old pre-mix fuel in my 04 Chevy truck for about 3 years with no problem
04-07-2009, 12:41 PM #6
my gpr is pre mix and i even run yami glue through my injectors and they have been flow checked at zero, 10hours and back out at 20 hours and each time checked by ride buddy and forum member steved and have been the same every time,never showed signs of clogging....
04-07-2009, 01:21 PM #7
- Join Date
- Apr 2006
- panama city beach 'fl
04-07-2009, 02:24 PM #8
04-07-2009, 04:36 PM #9
Pre-mix works great. I've got 300 hours on mine since I dumped the oil injection. I send my injectors out to get flow tested and cleaned recently (for the 1st time) and they were in great shape. Didn't even need to be done. I do use Yamaha ring free
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By chevyrocks3 in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 06-01-2013, 07:58 AM
By Chrisrokc in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 04-03-2007, 04:38 PM
By Kinchyle in forum 4-Tec PerformanceReplies: 35Last Post: 04-12-2006, 07:56 PM
By Green Hulk in forum 4-Tec PerformanceReplies: 12Last Post: 04-06-2006, 02:29 AM
By Green Hulk in forum 4-Tec PerformanceReplies: 18Last Post: 06-17-2005, 02:21 PM