04-13-2009, 08:43 AM #1
2000 900stx pump rebuild questions
I'm in the process of rebuilding the jet pump in this ski. The problem is i don't have any manual to reference on putting it back together. My questions are:
(1) Does this pump have a bushing that goes right under the impeller? I didn't find
one there when i took it apart.
(2) This pump has two seals that go in the impeller housing. One thicker that the
other. Which one goes in first. & i'm assuming they go in with the internal spring
facing out ...or in?
(3) I don't see any replacable grease seal on the spline part of this impeller.
Does this unit have one....because i didn't get anything other than a new end cone.
Iv'e already got a reman impeller, a build kit & front cone from SBT. i just waiting on this info to finnish it up. thanks
04-13-2009, 04:27 PM #2
04-16-2009, 09:27 AM #3
this was posted in the FAQ section which generally isn't for answering questions unless somebody already has some writeup on it.
We have a bunch of changes happening right now, but I'm going to move this to the 2stroke section where maybe you can get some folks to help.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By macGruber in forum Sea Doo Open DiscussionReplies: 3Last Post: 08-02-2011, 01:32 PM
By lilman573 in forum 2-Stroke PerformanceReplies: 8Last Post: 07-18-2010, 07:04 PM
By hermie in forum 2-Stroke PerformanceReplies: 0Last Post: 07-07-2010, 01:10 PM
By DKFox in forum 2-Stroke PerformanceReplies: 2Last Post: 07-07-2009, 02:11 PM
By rob2337 in forum Polaris Open DiscussionReplies: 5Last Post: 04-02-2008, 06:17 PM