Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 45
  1. #1

    Join Date
    May 2007
    Location
    Sydney, Australia
    Posts
    63

    Jet Worx Racing NEW ECU

    I have finally finished testing our new Axis 1 ECU It will be available from next week, its a complete plug in system no cutting soldering or extra manifold vacuem hoses, the ECU is 100% marinised it will be supplied with 1 of 3 maps, rootes , vortec or turbo it has been created in house not based on Microtec ( that were using for other applications) or any other system. The ecu can be tuned as either a piggy back or a stand alone system in map or tps modes, it gives 100% control over fuel & spark, still keeps all the nice factory warnings & alarms, security keys etc, has a built in data loging facility, with optional pulse width boost controler & other optional outputs if required....

    Pricing will be $1600us, Tuning software & cable will be an extra $200us, you can contact me here via pm or [email protected], our new webbsite should be up & running in about 4 weeks.

    I will post some pics tomorrow of ECU & interface...


  2. #2
    stangbang's Avatar
    Join Date
    Oct 2007
    Location
    West Palm Beach
    Posts
    844
    +1
    129
    This is awesome news. Now all we need is a twin screw sc!


    Quote Originally Posted by Green Machine View Post
    I have finally finished testing our new Axis 1 ECU It will be available from next week, its a complete plug in system no cutting soldering or extra manifold vacuem hoses, the ECU is 100% marinised it will be supplied with 1 of 3 maps, rootes , vortec or turbo it has been created in house not based on Microtec ( that were using for other applications) or any other system. The ecu can be tuned as either a piggy back or a stand alone system in map or tps modes, it gives 100% control over fuel & spark, still keeps all the nice factory warnings & alarms, security keys etc, has a built in data loging facility, with optional pulse width boost controler & other optional outputs if required....

    Pricing will be $1600us, Tuning software & cable will be an extra $200us, you can contact me here via pm or [email protected], our new webbsite should be up & running in about 4 weeks.

    I will post some pics tomorrow of ECU & interface...

  3. #3
    Banned User
    Join Date
    Jul 2007
    Location
    Austria
    Posts
    413
    good work

  4. #4
    Fat Man, Little Boat Region8Ultra250X's Avatar
    Join Date
    Jun 2007
    Location
    Jersey
    Posts
    5,563
    +1
    169
    damn... now i need to go find that turbo i hid in the shop.....

  5. #5
    Kiwi Racer's Avatar
    Join Date
    Jun 2007
    Location
    NewZealand
    Posts
    290

    Im waiting for mine

    Just send it on the sheep carrier to NEWZEALAND.

  6. #6

    Join Date
    May 2007
    Location
    Sydney, Australia
    Posts
    63
    NO I prefer the green Kiwi bat phone or the cone of silence....

    Quote Originally Posted by Kiwi Racer View Post
    Just send it on the sheep carrier to NEWZEALAND.

  7. #7
    GODOSIDIS's Avatar
    Join Date
    May 2007
    Location
    Greece
    Posts
    735
    Will the ECU give any gains to a stock 08-09 ski?
    Can u play with timing or other things?

    And get the photos ON-LINE!

  8. #8

    Join Date
    May 2007
    Location
    Sydney, Australia
    Posts
    63
    Fully programable means fully programable, it will make more horse power accros the board on 07,08 & 09 models can be used from stock to whatever monster you think you can build....



    Quote Originally Posted by GODOSIDIS View Post
    Will the ECU give any gains to a stock 08-09 ski?
    Can u play with timing or other things?

    And get the photos ON-LINE!

  9. #9
    Hooah_Killer's Avatar
    Join Date
    Sep 2008
    Location
    Midwest
    Posts
    412
    Quote Originally Posted by Green Machine View Post
    Fully programable means fully programable, it will make more horse power accros the board on 07,08 & 09 models can be used from stock to whatever monster you think you can build....
    so do you have a rough estimate on hp gains across the board for stock to semi modded to modded ultras?

    good work mr todd

  10. #10

    Join Date
    May 2007
    Location
    Sydney, Australia
    Posts
    63
    on a standard ski its probably 20 hp as far as any mods that I have not done as good as you can tune it.....
    Quote Originally Posted by Hooah_Killer View Post
    so do you have a rough estimate on hp gains across the board for stock to semi modded to modded ultras?

    good work mr todd

Page 1 of 5 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Check out these new WORX Racing Products for Yamaha skis
    By Green Hulk in forum Yamaha PWC Performance (4-stroke)
    Replies: 14
    Last Post: 03-03-2017, 03:47 AM
  2. New Sponson Design from Worx Racing
    By FZSN in forum Yamaha PWC Performance (4-stroke)
    Replies: 8
    Last Post: 01-12-2014, 03:31 PM
  3. FS Worx Racing wr235 Intake grate New in package!
    By Joe Stang in forum Sea Doo Classifieds
    Replies: 1
    Last Post: 03-22-2011, 02:11 PM
  4. FS 04-05 Rotax Racing 8600 ECU BRAND NEW
    By HallPass in forum Sea Doo Classifieds
    Replies: 1
    Last Post: 03-07-2010, 05:10 PM
  5. Is anyone going to try the new ECU??? I may, My options
    By Jrsrxp in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-05-2005, 09:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •