Results 1 to 8 of 8
  1. #1
    FrankieV123's Avatar
    Join Date
    Aug 2008
    Location
    Florida -JERSEY
    Posts
    260
    +1
    1

    4 inch Kanaflex with breather hose attached?

    I wanna order my parts for hte Kanaflex intake this weekend but i ride in saltwater and several posts suggest reconnecting the breather hose to the filter if riding in saltwater so it can oil the supercharger? anyone got any input on this...and if so, what would i need to do it?

    .....a list of what i need to do the KANAFLEX could help too if i use the R&D adapter


  2. #2
    MPower's Avatar
    Join Date
    May 2005
    Location
    Raleigh, NC
    Posts
    3,340
    +1
    121
    the breather house has a fitting on the end that fits into the stock system. drill a hole the size of that fitting into your filter to kanalfex adapter. silicone around the opening to seal it up.

  3. #3



    this is what i did seems to be fine I just used a brass hose joiner and some extra hose and the OEM conector it will just pull out off your old intake...I've only had the ski out once and it seemed fine

  4. #4
    FrankieV123's Avatar
    Join Date
    Aug 2008
    Location
    Florida -JERSEY
    Posts
    260
    +1
    1
    OK ORDERING TODAY....fun job for next weekend

  5. #5
    FrankieV123's Avatar
    Join Date
    Aug 2008
    Location
    Florida -JERSEY
    Posts
    260
    +1
    1
    Before I buy the wrong spectre what filter are you using? The oiled cotton element or stainless mesh? Or any other requests

  6. #6
    flyguytki's Avatar
    Join Date
    May 2008
    Location
    Daytona Beach Fl
    Posts
    443
    stainless steel mesh from Pepboys 24.99 up to a 4''

  7. #7
    MPower's Avatar
    Join Date
    May 2005
    Location
    Raleigh, NC
    Posts
    3,340
    +1
    121
    Spectre 4" stainless is the best one I've seen. The cheapos can collapse on the bigger chargers. $42 on Amazon

  8. #8
    FrankieV123's Avatar
    Join Date
    Aug 2008
    Location
    Florida -JERSEY
    Posts
    260
    +1
    1
    After all is said and done..i got a 4 inch spectre SS Filter...7ft of kanaflex....R&D coupler... 4 inch adapter to connect filter to kanaflex...and clamps of course....ooo i went with the Catch Can instead of reconnecting the original breather hose

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts BOV with silicone hose for attachment to stock intercooler
    By jetpilot785 in forum Yamaha Classifieds
    Replies: 0
    Last Post: 06-20-2016, 09:46 AM
  2. Rode Yamaha FX HO 1.8 with breather hose off
    By Digs in forum Yamaha PWC Performance (4-stroke)
    Replies: 9
    Last Post: 11-05-2015, 10:40 AM
  3. sl650 rebuild- what hoses attach to the intake pipe?
    By D-Rock in forum Polaris Open Discussion
    Replies: 14
    Last Post: 01-04-2009, 01:55 PM
  4. 95 GTX with 657X (Hose diagrams?)
    By countryman1965 in forum Sea Doo Open Discussion
    Replies: 1
    Last Post: 07-20-2007, 05:21 PM
  5. 4" intake & breather hose
    By ou812 in forum 4-Tec Performance
    Replies: 30
    Last Post: 05-28-2007, 02:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •