Thread: Beat a dead horse!
06-07-2006, 09:34 AM #1
Beat a dead horse!
Ok guys. with the help of Mr. Bill' GPS and Tiny Tach, i was reading 7090 RPMs @ 55.5 mph yesterday on 4-6 in chop.
R&D Rec. Head
VF Reeds, Protec Stuffer
D-Plate and sensor
Jet Works (Cosca version)
Riva Free Flow
Riva 1200 Intake Grate
Solas 13/19 prop
Stock Carbs rejetted to:
Pilots - 110
Mains - 120
Needles and Seats - 1.5
Springs - 95 g.
For some reason the back of my pump shoe keeps dropping down almost 1 1/2 inches. Ive even used Loctite on the bolts. im going to shim my plate too. and we will see what happens.
06-07-2006, 09:46 AM #2For some reason the back of my pump shoe keeps dropping down almost 1 1/2 inches. Ive even used Loctite on the bolts. im going to shim my plate too. and we will see what happens.
06-07-2006, 09:50 AM #3For some reason the back of my pump shoe keeps dropping down almost 1 1/2 inches.
06-07-2006, 02:22 PM #4
Those are some good rpms you are turning now. I agree with
everyone, you have some serious issues with your hull. You should be
going much faster than that based on your rpm. Sounds like your
pump shoe is about to rip out. Remember you told me you had some water coming in your boat about a week ago. It sounds like it was coming in from the pump shoe. Don't ride it again until you take that apart.
06-07-2006, 03:17 PM #5
Yeah im tearing it all apart tonight, If it isnt one things its another!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By nitrosportman in forum Polaris Open DiscussionReplies: 18Last Post: 05-12-2011, 10:07 PM
By dorf in forum Polaris How To & FAQsReplies: 2Last Post: 08-17-2008, 08:33 PM
By WATER WOODY in forum Yamaha Open DiscussionReplies: 26Last Post: 03-13-2008, 12:41 PM
By 01xdime in forum 4-Tec PerformanceReplies: 11Last Post: 08-10-2005, 06:36 PM
By MikeTrin in forum Sea Doo Open DiscussionReplies: 5Last Post: 05-24-2005, 10:18 AM