Thread: carb setting for choke removal
04-21-2009, 03:56 PM #1
carb setting for choke removal
I have a bone stock 98 GP1200. I removed the choke plates and installed a primer kit. Can I still run the stock staggered jetting and turn the high needles up a little?
04-21-2009, 03:59 PM #2
Yeah I would only turn them if any up 1/8 on the high's only.
04-21-2009, 04:07 PM #3
Thanks, another question I forgot the order the low spped jets went into the carbs. Were they 100(front carb), 95(middle carb), 97.5(back carb).
04-21-2009, 04:09 PM #4
04-21-2009, 04:12 PM #5
cool thanks a bunch. This season I just plan on riding stock and upgrading the ride plate and intak grate. Next season I will do the motor. When should I switch over to the 1.5N/S
04-21-2009, 04:14 PM #6
04-21-2009, 04:15 PM #7
while your here helping me out. What rideplate and intake grate would you recommend.
04-21-2009, 04:16 PM #8
Talk with Scotty, Kris on that ....I'm not a GP guy.
I know they like the XO prop...but let them chime in on those!
04-21-2009, 04:16 PM #9
04-21-2009, 04:29 PM #10
- Join Date
- Aug 2006
hit up oside bill for his 1200 specs!! I run them in both my 1200's
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jetmaniac in forum Yamaha ClassifiedsReplies: 8Last Post: 09-13-2009, 06:25 PM
By Nick_Car in forum Yamaha PWC Performance (2-stroke)Replies: 10Last Post: 04-15-2009, 08:38 PM
By atc250r in forum Yamaha Old School SkisReplies: 6Last Post: 08-21-2008, 09:24 PM
By Desert Rat in forum Yamaha Old School SkisReplies: 1Last Post: 08-13-2008, 10:18 PM
By mrbtd in forum Yamaha PWC Performance (2-stroke)Replies: 1Last Post: 04-05-2007, 08:48 AM