Results 1 to 10 of 10
  1. #1

    94 waveblaster thanks. (no power)

    I want to thank everyone for there input with my new blaster. I have not had much time this week to tweak on it I will keep you up to date as I progress. Thanks again.


  2. #2

    94 blaster update

    Hello again everyone, Update on the 94 Blaster. I put new plugs in it and fuel right before I was leaving to take it out a friend noticed the long 6m bolts that go from the thrust cone through the pump and secure to the alum. housing the two bottoms ones were gone compleatly and the top were sheared off. So after finally getting it together a week or so later I got to take it out again. It did better but still probably around 40 or 45 mph. What do you think it should be running. Compression was down about 25psi would that be enough to lose power?

  3. #3
    Mpeavler's Avatar
    Join Date
    Dec 2005
    Location
    Anderson, Indiana
    Posts
    5,155
    +1
    170
    stock speeds are about there. Trust me when I say the biggest gain ever for your ski is a pipe. I would go in this order if you want your ski to be wicked!!!

    Factory Mod or Limited pipe 1st choice.....2nd would be Riva Red pipe
    185 PSI head...aftermarket like ADA, Riva etc
    Solas 13/17 Concord
    Top loader intake
    Pro-tec plate
    Dual cooling "must for factory pipes"
    F/A and adapter


  4. #4
    Old Ski Insanity w/rpm500's Avatar
    Join Date
    Aug 2005
    Location
    Crystal River Fl
    Posts
    2,208
    sorry for the thread theft... M/P,!!! I hate you ,lol...that is such a great video on having a 'blast'.. hope my GP with the extra push of the 155mm responds 'vertically' as well as that blaster does...

  5. #5
    Mpeavler's Avatar
    Join Date
    Dec 2005
    Location
    Anderson, Indiana
    Posts
    5,155
    +1
    170
    79mph ...I'm going to assume something but a blaster.....

    M

  6. #6
    Old Ski Insanity w/rpm500's Avatar
    Join Date
    Aug 2005
    Location
    Crystal River Fl
    Posts
    2,208
    looking at his signature picture .. my guess.. built tripple pipe in a gpr ..not sure if those $'s are in US ..43k is pretty steep!!

  7. #7
    pilo704's Avatar
    Join Date
    Jul 2008
    Location
    dirty jerzz
    Posts
    830
    lets all hope he diddnt pay 40k i see gas valves and a blue hull i bet its a 08 gpr..

  8. #8
    Mpeavler's Avatar
    Join Date
    Dec 2005
    Location
    Anderson, Indiana
    Posts
    5,155
    +1
    170
    Quote Originally Posted by pilo704 View Post
    lets all hope he diddnt pay 40k i see gas valves and a blue hull i bet its a 08 gpr..
    x2

  9. #9
    Where is a good place to find a pipe for my blaster?

  10. #10
    Mpeavler's Avatar
    Join Date
    Dec 2005
    Location
    Anderson, Indiana
    Posts
    5,155
    +1
    170
    Classifieds on Pwctoday.com or here or even Ebay. Factory MOD pipes are the best out there period....for the rec boat. If you ran a speedwerx...they require more work but also make tons of top end power. Riva pipes are not to bad if you prop your boat to match the pipe

    M

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 94 waveblaster has no power
    By Mark93spx in forum Yamaha Old School Skis
    Replies: 12
    Last Post: 07-13-2011, 01:45 PM
  2. 94 SL750 no power
    By Andrerichard in forum Polaris Open Discussion
    Replies: 65
    Last Post: 06-26-2010, 09:32 AM
  3. 94 Polaris SL750 No Power??
    By Cyrus40 in forum Polaris Open Discussion
    Replies: 7
    Last Post: 06-02-2010, 01:06 PM
  4. 94 750SX no power after crashing
    By dbjnky in forum Kawasaki PWC Performance (2-stroke)
    Replies: 0
    Last Post: 06-29-2009, 07:21 PM
  5. Help!!!!94 650 still no power!!!!!
    By verrettej in forum Polaris How To & FAQs
    Replies: 4
    Last Post: 08-06-2008, 11:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •