Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16
  1. #1
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,546
    +1
    311

    RXT-X stage 2 prop

    are you guys running a repitched 15/22 or something else

    I know there is not a "stage 2 kit" but I am adding the Thru Hull Ex, manifold upgrade kit, intercooler relo kit, and a B-Kit SC I already have the 15/22 so should I just pitch it or is there a better choice


  2. #2
    West Texas RXP skoepp's Avatar
    Join Date
    Oct 2007
    Location
    west texas
    Posts
    12,019
    +1
    149
    Quote Originally Posted by shhr View Post
    are you guys running a repitched 15/22 or something else

    I know there is not a "stage 2 kit" but I am adding the Thru Hull Ex, manifold upgrade kit, intercooler relo kit, and a B-Kit SC I already have the 15/22 so should I just pitch it or is there a better choice
    I would think that would be a good start and then pitch as needed. are talking with stock ecu or reflash?

  3. #3
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,546
    +1
    311
    I am running the 15/22 now with just a 4" air and the riva grate so I may just add some pitch to it for now.

    I am currently running stock ECU but am waiting for more results on the reflash ECU before I decide

  4. #4

    Join Date
    Jul 2007
    Location
    PDX - Oregon
    Posts
    2,205
    I was talking with Mark at RR and he told me they were having problems with running out room to bend the 15/22 enough... don't know if you're close to that but throwing it out there.

  5. #5
    West Texas RXP skoepp's Avatar
    Join Date
    Oct 2007
    Location
    west texas
    Posts
    12,019
    +1
    149
    Quote Originally Posted by pdxrealtor View Post
    I was talking with Mark at RR and he told me they were having problems with running out room to bend the 15/22 enough... don't know if you're close to that but throwing it out there.
    Ya, but unfortuneatly there is not a bigger solas 4 blade. Not sure is skat would or does make a bigger 4 blade.
    Speed Freeks has good results on some fast skis pitching the solas 15/20 or 15/22 to 23 - 25 degrees on trailering edge.

  6. #6
    SeaGoat's Avatar
    Join Date
    Jun 2008
    Location
    Jacksonville, N.C.
    Posts
    2,214
    +1
    2
    You can always give the R&D 14/24 a try. It's intended for the P-X but should work fine in this application.

  7. #7
    West Texas RXP skoepp's Avatar
    Join Date
    Oct 2007
    Location
    west texas
    Posts
    12,019
    +1
    149
    My R & D was stamped a 15/21 solas.
    Which is fine, as they did a good job rebending prop.

    My point is, we only have a 15/20, 15/21. and 15/22 solas stamped props to work with.

  8. #8

    Join Date
    Jul 2007
    Location
    PDX - Oregon
    Posts
    2,205
    Quote Originally Posted by skoepp View Post
    My R & D was stamped a 15/21 solas.
    Which is fine, as they did a good job rebending prop.

    My point is, we only have a 15/20, 15/21. and 15/22 solas stamped props to work with.

    Uhhh... since when there a 21/22 solas factory prop choice?? Pretty sure 15/20 is the top "factory" prop... everything else is bent by someone else...

  9. #9
    SeaGoat's Avatar
    Join Date
    Jun 2008
    Location
    Jacksonville, N.C.
    Posts
    2,214
    +1
    2
    I agree. I figured the R&D's were repitched 15/22's or something similar. Just thought the 14/24 would be a good candidate since it was pitched with the X ski in mind.

  10. #10
    West Texas RXP skoepp's Avatar
    Join Date
    Oct 2007
    Location
    west texas
    Posts
    12,019
    +1
    149
    Quote Originally Posted by pdxrealtor View Post
    Uhhh... since when there a 21/22 solas factory prop choice?? Pretty sure 15/20 is the top "factory" prop... everything else is bent by someone else...
    You have your solas 15/20 and 15/22 stamped props. Now rather the root angle is actually different between the two, not sure.
    The only 15/21 stamped solas i have seen is my R and D pro pitch prop. I too have never seen a 15/21 solas offered in the market to my knowledge.

    Seagoat, you are correct that the R & D 24 degree prop should be the best that we have offered off the shelf in degrees on trailering edge.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Rxt 06 stage 3 cutting out after warming up
    By TIBFIB in forum 4-Tec Performance
    Replies: 5
    Last Post: 06-01-2007, 11:01 PM
  2. Rxt Riva Stage Iii
    By Foxy_Stef in forum 4-Tec Performance
    Replies: 0
    Last Post: 11-04-2006, 01:11 PM
  3. RXT Riva stage 1 3/4 Results
    By Shibby1485 in forum 4-Tec Performance
    Replies: 15
    Last Post: 05-16-2006, 09:02 PM
  4. RXT and my new prop
    By Kinchyle in forum 4-Tec Performance
    Replies: 5
    Last Post: 08-27-2005, 09:06 PM
  5. Anyone running RXT Riva Stage 2?
    By Shibby1485 in forum 4-Tec Performance
    Replies: 12
    Last Post: 07-19-2005, 12:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •