04-25-2009, 06:58 PM #1
Understanding the RXT coolant tank
After a very wet ocean ride today, I began cleaning out my '08 RXT and applying plenty of XP-S lube inside the hull. I removed the bolted-on plastic covering beneath the seat, which also has clips that hold the coolant tank. My coolant tank has two hoses coming off of it. One black and one clear hose. The clear hose appears to just come out of the top of the tank, loop down around the bottom, and point back upwards, and it's not connected to anything. Is this normal? Or did I dislodge the clear tube's connection somehow? What's the purpose of the clear hose?
The ski in this picture isn't mine, but the basic setup looks the same. One black tube, and a clear tube that comes off the oppossite side and may or may not be connected to anything.
04-25-2009, 07:29 PM #2
- Join Date
- Oct 2005
- Lexington, KY
The clear tube is just an over flow, it just goes to the bottom of the hull.
04-25-2009, 11:19 PM #3
- Join Date
- Jul 2008
- Peterstown, WV
That is normal.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By flyguytki in forum 4-Tec PerformanceReplies: 13Last Post: 05-09-2009, 01:47 PM
By hdsilverado in forum Sea Doo Open DiscussionReplies: 3Last Post: 04-06-2008, 09:18 AM
By scooby-rxp-doo in forum Sea Doo Open DiscussionReplies: 7Last Post: 07-12-2005, 10:16 AM
By ActionR32 in forum 4-Tec PerformanceReplies: 4Last Post: 07-04-2005, 06:16 PM
By SKR8PN in forum 4-Tec PerformanceReplies: 15Last Post: 07-03-2005, 06:48 PM