Results 1 to 6 of 6
  1. #1

    Join Date
    Dec 2007
    Location
    Isrrel
    Posts
    90

    xl limited 1200r to 1300

    hi everyone
    i have that jetski with two broken cylinder,i have new crank and three
    good cylinder and pistons of 1300r not the pv model.
    all the other mode are like the xlt with carburetor.
    my question is if i install those cylinder will it work fine?
    thanks for any help


  2. #2
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    It will work fine You will need to rejet the carbs.

  3. #3

    Join Date
    Dec 2007
    Location
    Isrrel
    Posts
    90
    thank for reply
    and what about the power compare to the old mode -xlt?

  4. #4
    CHICKA WAH WAH bren's Avatar
    Join Date
    Sep 2007
    Location
    Cairns, Australia
    Posts
    595
    Quote Originally Posted by izik View Post
    thank for reply
    and what about the power compare to the old mode -xlt?
    slightly better. But I would reccommend an after market ECU (advent t3) as the 1200 cdi/ecu is designed for timing with pv's

  5. #5
    zx11rider's Avatar
    Join Date
    Jun 2009
    Location
    Cape Coral
    Posts
    1,132
    Did you gps the ski before, I would like to know what you gain in top speed, i think they should have put the 1300 in the xlt from the factory. gl with your build

  6. #6
    Moderator DrewNJ's Avatar
    Join Date
    Dec 2005
    Location
    Marlton, NJ
    Posts
    3,716
    +1
    1
    it will work very good..nice upgrade for sure.
    You'll also need the 1300 head or have your 1200 head cut for 1300

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 1999 xl 1200 limited idles to fast out of water.
    By Yardbird in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 05-29-2013, 09:38 PM
  2. 66e jugs swap to 1300 ?
    By blaster800 in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 08-02-2007, 12:56 AM
  3. Help - GP1200R to 1300 top end conversion
    By Autosport in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 02-26-2007, 10:10 AM
  4. If 1200 Cyl are machined to 1300 do i need a 1300 head ??
    By GPR1200_syd in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 11-23-2006, 05:37 PM
  5. Rideplate comparison/XL Limited Stage II update
    By Smitty in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 05-11-2006, 01:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •