Thread: FS: 4-Tec Bored TB $220 shipped
04-29-2009, 09:45 AM #1
FS: 4-Tec Bored TB $220 shipped
Maxbore did the work
It is not PERFECT !!!!!! If you look closely the shaft needs to be cleaned up or replaced and the screws holding the plate need to be replaced. I am still surprised he didnt cleant it up with a wire wheel when it was apart. Also where the throttle connects the plastic is broken but it wont hurt anything.
Sensors are still there and you get the gasket and bolts also.
Will trade for an 04 stock ECU with key or 04 Riva ECU (with $$ of course).
04-29-2009, 09:46 AM #2
04-30-2009, 02:08 AM #3
- Join Date
- Nov 2006
- Delray Beach, Florida
what is the bore size?
04-30-2009, 06:09 AM #4
Pretty sure it is 62
05-04-2009, 08:18 PM #5
05-06-2009, 06:49 AM #6
bore is tapered 62mm at the top and goes down to 60mm
05-06-2009, 08:06 AM #7
any idea what the gains would be on a stock-stockish engine? this would need to be programmed to the ecu with buds, right?
05-06-2009, 12:09 PM #8
Does not need to be programed. Drop in part.
05-06-2009, 12:20 PM #9
All I know for sure is the fastest ski's to this mod. I had an extra TB to have it done while a friend did the same. I planned to do a back to back etc.. but would like to put some money together for an ECU upgrade instead.
Just the work @ Maxbore was $150 ish with shipping etc.
05-15-2009, 05:42 PM #10
Still have it. No longer need an ECU though.
$200 shipped ! Will go on eBay Sunday night.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Dirty Sanchez in forum Sea Doo 4Tec SkisReplies: 2Last Post: 10-29-2012, 10:23 AM
By Dirty Sanchez in forum Yamaha ClassifiedsReplies: 1Last Post: 08-22-2012, 08:12 PM
FS - Parts 4tec J-pipe with O2 Bung! $220 shipped!By inteljd in forum Sea Doo ClassifiedsReplies: 0Last Post: 06-11-2012, 11:06 AM
By bksbigboy69 in forum Sea Doo ClassifiedsReplies: 2Last Post: 12-24-2011, 08:43 PM
By Seadooracer9 in forum Sea Doo ClassifiedsReplies: 3Last Post: 08-17-2009, 10:06 PM