Thread: Speedo sensor disconnect ?
04-30-2009, 03:28 PM #1
Speedo sensor disconnect ?
Can you disconnect the speedo sensor and not get a alarm of some kind ?
Dont see any alarm like that in the manual but just curious from people who have eliminated that from the ride plate.
04-30-2009, 03:44 PM #2
04-30-2009, 03:47 PM #3
just unplug it and you are good to go
04-30-2009, 04:37 PM #4
04-30-2009, 08:26 PM #5
Just DON'T do like I did,and cut the wires and leave them to short out my dash and Yes I rode the short Bus
04-30-2009, 08:30 PM #6
- Join Date
- Jan 2007
I removed the whole wire and used the hole as a second bilge pump output. Kept the speedo mount on the ride plate, took off the wheel, shaped a piece of metal to match the rideplate, and used JB weld for the rest. Its Perfect!
04-30-2009, 08:38 PM #7
there's just something about not having a dash readout of the speed that bothers me though
kinda funny when friends come back saying they did 87 mph
04-30-2009, 08:49 PM #8
- Join Date
- Jul 2008
- Chesterfield Virginia USA ~ On the James River~
Yea me to,even if it is off by 10mph.
04-30-2009, 08:54 PM #9
I look at it as drag..........
04-30-2009, 09:03 PM #10
i see your point but weighing no speedo vs the .001 mph you might pick up it seems senseless. would just look weird seeing only 0 MPH up there. I'm not trying to argue becuase plenty of these .1 mph mods will get you a lot in the long run... it is just my preference to keep it... maybe someday i'll change my mind.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By american musclecraft in forum Polaris ClassifiedsReplies: 0Last Post: 06-01-2009, 09:44 AM
By crashhard in forum Yamaha ClassifiedsReplies: 0Last Post: 01-20-2009, 11:44 AM
By boostaholic in forum Sea Doo ClassifiedsReplies: 2Last Post: 09-22-2008, 11:22 PM
By sportman in forum Kawasaki PWC Performance (4-stroke)Replies: 3Last Post: 04-17-2008, 01:46 PM
By yami_rida#26 in forum Yamaha PWC Performance (2-stroke)Replies: 8Last Post: 04-07-2008, 10:34 PM