Results 1 to 2 of 2
  1. #1

    Is it SC slipping?

    Hi guys

    My and my friend has p-x with same mods ( grate, 4" flex intake, prop and reduction nozzle ).

    With 82 nozzle we saw high 73's-74@ 8050rpm now with hotter weather we installed 83mm but still down to 7800rpm.

    is it SC slipping ( almost 70hrs ) or coz hotter wather?

    If it coz hotter weather should i get bigger nozzle and lost top speed or what?


  2. #2
    formerly Gold06RXP Turbo Nick's Avatar
    Join Date
    May 2007
    Dayton, OH
    Could be a bit of both. What where the temps when the RPMs where up? What are they now? With 70 hours you need to pull the charger and see where the slip is at. It should be at least 10 LBS/FT

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Cluth slips out on the water
    By Kinchyle in forum 4-Tec Performance
    Replies: 12
    Last Post: 04-25-2006, 07:02 PM
  2. My Clutch Failed the test bad, but never slipped
    By Shibby1485 in forum 4-Tec Performance
    Replies: 4
    Last Post: 03-16-2006, 10:32 PM
  3. clutch slipping question
    By carlo4tech in forum 4-Tec Performance
    Replies: 2
    Last Post: 11-15-2005, 11:18 AM
  4. Perfect torque wrench for measuring clutch slip moment
    By Green Hulk in forum 4-Tec Performance
    Replies: 9
    Last Post: 09-10-2005, 09:29 AM
  5. Clutch Slip?
    By Tube Master in forum 4-Tec Performance
    Replies: 4
    Last Post: 05-31-2005, 11:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts