Results 1 to 6 of 6

Thread: lubing 05 pump

  1. #1
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165

    lubing 05 pump

    is there a trick way to lube the bearings in the pump housing?? I have seen photo's of a plug on the bullet which looks like a drain/filler plug...???im doing the 05 conversion and need to lube my pump...what kind of lube or greese is best??thanks in advance.


  2. #2
    r33pwrd's Avatar
    Join Date
    Mar 2006
    Location
    Sammamish Washington
    Posts
    4,216
    +1
    360
    Do a search or look at this post:

    http://www.greenhulk.net/yamaha/view...light=oil+pump

  3. #3
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165
    thanks..i knew i read that post but forgot where it was...thanks....gonna press the ol shaft tomorrow and drill/tap the cone and use amzoil...

  4. #4
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165
    finished...was not too bad to do..pressed in shaft ,put on dynafly,tapped cone and filled unit w/amzoil ,put pump in the mill and gave it a proper shave to get clearance for jims ride plate.....removed sipion tube and tiged up the hole......will test later.

  5. #5
    r33pwrd's Avatar
    Join Date
    Mar 2006
    Location
    Sammamish Washington
    Posts
    4,216
    +1
    360
    After grinding my pump for jims plate a wish I had just put it on my mill it would have been a lot quicker! Good luck!

  6. #6
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165
    yes you are correct..all bolt on's are simple bolt on's as long as you have a complete machine shop.....I used my fly cutter ,it put a nice machined and flat surface for the plate clearance...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 05 pump?
    By myth in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 05-11-2006, 05:55 PM
  2. 05 Pump and Extension
    By Boosteda4tq in forum Yamaha PWC Performance (2-stroke)
    Replies: 14
    Last Post: 04-18-2006, 07:20 PM
  3. Island racing and 05 pump question ??
    By slow1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 12
    Last Post: 02-17-2006, 12:27 AM
  4. What all parts do i need to do the 05 pump conversion ??
    By slow1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 12-23-2005, 05:44 PM
  5. 05 pump- does this look ok to you?
    By idizzy in forum Yamaha PWC Performance (2-stroke)
    Replies: 25
    Last Post: 12-10-2005, 05:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •