Results 1 to 3 of 3
  1. #1
    tempest.runner's Avatar
    Join Date
    Dec 2008
    Location
    Ottawa, ON
    Posts
    860
    +1
    2

    Registration #'s need to be a specific size in Ontario?

    Just curious if anyone knows if the registration numbers need to be a specific size in Ontario? I was thinking about getting some custom numbers made up where the first two letters "ON" and the last two numbers are a little larger than the other numbers... Anything wrong with in doing this?


  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,584
    +1
    1,272
    The lettering size is a federal regulation, not provincial.

    Per Service Canada
    "...You must display the licence number on both sides of the bow in block characters that are at least 7.5 centimetres (3 inches) high, in a colour that contrasts with the colour of the bow..."

    I would ask the local Police Marine unit for their opinion - they are the guys who would decide whether there was a 'problem' with your hull numbering.

  3. #3
    GOT BOOST? Dockside's Avatar
    Join Date
    Dec 2008
    Location
    Ontario, Canada
    Posts
    3,879
    +1
    116
    I know on my lake if the OPP check your boat they put a sticker on it and they wont bug you again cause they know its been check out befor. cant remeber what it looks like though but it does say the current year.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Custom exhaust Needs to be built.
    By Allgood288 in forum Southwest
    Replies: 4
    Last Post: 07-15-2008, 06:16 PM
  2. Stage III sc what needs to be done to run on stock ski?
    By JonnyRXT in forum 4-Tec Performance
    Replies: 4
    Last Post: 06-02-2008, 04:44 PM
  3. Do the PV shafts need to be removed to get the valves out?
    By jpa1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 02-04-2008, 10:22 PM
  4. Is it normal for the cylinders not to be the same size?
    By jpa1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 08-21-2007, 12:21 PM
  5. 63 freaken degrees here in NYC, need to be on my ski!
    By Shibby1485 in forum Sea Doo Open Discussion
    Replies: 17
    Last Post: 01-31-2006, 11:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •