Results 1 to 3 of 3
  1. #1

    Fuel Primer Carb Setup Complete

    I finished my setup for my fuel primer kit on my carbs tonight and thought I would share pics. I removed the choke butterfly valves and related hardware. Then, I drilled and tapped the existing holes to a 1/8" NPT thread. I used a 90* bend and an adapter to 1/4" barbed fitting for the delivery side. The opposite side has a plug. I used blue threadlocker on all of the threads to hold it even more snug than the threads as well as seal any possible leaks. Let me know if you have any questions or suggestions.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P1020853.JPG 
Views:	80 
Size:	695.9 KB 
ID:	130341   Click image for larger version. 

Name:	P1020854.JPG 
Views:	79 
Size:	717.5 KB 
ID:	130342   Click image for larger version. 

Name:	P1020856.JPG 
Views:	66 
Size:	647.4 KB 
ID:	130343   Click image for larger version. 

Name:	P1020857.JPG 
Views:	69 
Size:	585.4 KB 
ID:	130344  

  2. #2
    PolarisNut's Avatar
    Join Date
    Dec 2006
    Lower Michigan
    Looks good, but you can buy inserts that press right into the choke shaft hole, and have a 1/8" pipe nipple. The other 3 holes get plugged with an included brass plug. The whole kit with primer plunger is about $25.

  3. #3
    That's about what I paid for my setup also. I liked the thought of having everything threaded and locking into place.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Pro 1200 fuel lines, carb setup
    By ff_pro1200 in forum Polaris How To & FAQs
    Replies: 2
    Last Post: 08-27-2012, 02:33 PM
  2. Carb setup with 3 output fuel pump
    By monsterbuck2006 in forum Polaris How To & FAQs
    Replies: 3
    Last Post: 07-13-2010, 03:57 PM
  3. FS 44mm complete carb setup off a 760 motor
    By TheTurtleMan in forum Yamaha Classifieds
    Replies: 1
    Last Post: 11-27-2009, 10:54 AM
  4. fuel primer for 95' slt 750
    By xplayer2885 in forum Polaris How To & FAQs
    Replies: 7
    Last Post: 08-03-2008, 09:13 AM
  5. Fuel primer
    By gerhand44 in forum Polaris How To & FAQs
    Replies: 1
    Last Post: 09-26-2006, 09:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts