Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23
  1. #1

    951 flywheel on a 98 xpl

    Is the flywheel on a 98 xpl different than other 951 engines. In 98 they used a single coil set up. The mag cup is different. Is the flywheel?


  2. #2

    Join Date
    Sep 2006
    Location
    down under
    Posts
    645
    +1
    15
    The flywheel will run, you have to ignore the index mark and rotate the cup one bolt hole.

  3. #3
    that is what the rust marks are telling me on the flywheel. If you know what I mean. the big holes in the mag left marks. I will try using them for a timing mark. Is there any way to bring #1 to tdc and adjust from there?

  4. #4
    which direction should I rotate?

  5. #5
    how the hell did you figure that one out? this boat is making me mad. I have put together two yami 1200 r motors and one yami 1100 raider while this little two cylinder has bugged me to death. Never should have bought the boat but I will finish it.

  6. #6
    he was right. I put it together and it poped It will run

  7. #7
    not. still at it.

  8. #8
    96XPSS's Avatar
    Join Date
    Feb 2006
    Location
    Warner Robins, GA Home of the 2007 All-Star Little League World Champions!
    Posts
    4,361
    Eel, it would be helpful if you would tell him which direction to turn the cup, as there are two different ways to rotate it.

  9. #9
    I bought a used flywheel and cup from a board member and I will see if that does it. Canadaxp sold me his old stock set up for 35. good guy and for that price I would have kept it for a spare.

  10. #10
    96XPSS's Avatar
    Join Date
    Feb 2006
    Location
    Warner Robins, GA Home of the 2007 All-Star Little League World Champions!
    Posts
    4,361
    Reg is a good guy. Deals like that should be reciprocated with a tip.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. motor mount shims on 98 xpl engine alignment
    By abarrassr07 in forum 2-Stroke Performance
    Replies: 6
    Last Post: 11-16-2008, 09:36 PM
  2. 98 XPL 951 cavitation
    By race24x in forum 2-Stroke Performance
    Replies: 6
    Last Post: 08-26-2008, 10:18 AM
  3. WTB 15/20 Concord impeller 98 XPL 951
    By race24x in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 07-31-2008, 04:40 PM
  4. Jet Kit for 98 XPL I talked to someone on the phone
    By race24x in forum 2-Stroke Performance
    Replies: 11
    Last Post: 05-23-2008, 10:15 PM
  5. WPS Finger Throttle on a 98 XPL??
    By nubmturk in forum 2-Stroke Performance
    Replies: 3
    Last Post: 04-27-2007, 11:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •