Thread: YAMALUBE 2W vs. other oils
05-11-2009, 06:49 AM #1
YAMALUBE 2W vs. other oils
Is this stuff good or just "not that bad"
Current i use 2W with oil Injection with a little extra to the gas tank.
If i go porting is pre mix a must or just add more to the tank.
I did`nt found a lot by searching for 2w Yamalube.
05-11-2009, 12:40 PM #2
i am using stock oil injection and i am ported. everything runs fine with no problems. i dont add extra oil in the gas. i am also interested in other oils with stock oil injection.
05-11-2009, 04:52 PM #3
- Join Date
- Aug 2008
amsoil dominater or racing oil is the best alternative, ran it my 12r for years and now both my 13r's with no problems, yamaha claims only their oil when running cats but most of us throw those out anyway, hope this helps
05-11-2009, 09:58 PM #4
05-11-2009, 10:44 PM #5
Yamalube is fine. Amsoil keeps the power valves a little cleaner.
I run Amsoil Interceptor both ways.
Premix in the GPR's and injection in the STXR.
You don't need to add any oil to your tank.
I have a ported 1300 and run 50:1 Interceptor
05-12-2009, 03:37 AM #6
Amsoil Interceptor. As mentioned, it keeps the powervalves clean.
Ran it for years in an unported 12R. performed the first 100hour inspection on my gas valves on amsoil and they had NO carbon deposit on them.
here is a good thread on pistonwash as well
05-12-2009, 03:49 AM #7
remember Yamaha dont blend there own oil, so if you on the hunt for an alternative look for NMMA TC-W3 with anti rust inhibitors
05-13-2009, 01:59 AM #8
05-13-2009, 02:00 AM #9
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By neowind in forum Yamaha PWC Performance (2-stroke)Replies: 12Last Post: 08-11-2009, 08:19 AM
By GTI-SE4426 in forum Yamaha Open DiscussionReplies: 0Last Post: 03-13-2009, 01:32 PM
By stingray152003 in forum Yamaha Open DiscussionReplies: 1Last Post: 07-05-2008, 02:58 PM
By emnuke123 in forum Yamaha ClassifiedsReplies: 6Last Post: 05-25-2008, 08:49 AM
By excess in forum 4-Tec PerformanceReplies: 10Last Post: 05-31-2006, 09:50 PM