Thread: Sticker removal
05-11-2009, 07:40 PM #1
any have any good ideas to remove the large seadoo stickers off the hull of a seadoo RXP.
05-11-2009, 07:42 PM #2
Use a heatgun to warm them up and they will peel right off.
05-11-2009, 07:53 PM #3
I replaced mine on the left side and they were not hard at all to take off. It was putting the new ones back on that gave me trouble.
05-11-2009, 08:12 PM #4
- Join Date
- Mar 2009
any household hair blower will work on the heat setting of course....
05-11-2009, 08:13 PM #5
05-11-2009, 08:16 PM #6
After you wash the ski, leave it out in the sun for 20 minutes, they peel clean off...
05-11-2009, 08:19 PM #7
05-11-2009, 09:00 PM #8
You need to use a heat gun, a blow drier will not be hot enough. I have found it is easier to remove stickers after a day or riding and the stickers getting wet. Heat up the sticker so it's HOT to the touch and then peel back while heating the back of the sticker.
If done right, the sticker will come up with no residue left behind.
05-12-2009, 06:16 PM #9
Yep, mine came off with no trouble using a heat gun.
05-13-2009, 10:00 PM #10
i had a little trouble with mine with the gun, the glue stayed on and were a pain to get the main sticker off, so i took kutzit to the top layer and sprayed carb cleaner on the glue and wiped right off, can use break parts cleaner too, didnt mess up the finish at all
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By SE TX Rider in forum Kawasaki Open DiscussionReplies: 6Last Post: 05-11-2008, 11:24 AM
By VaRedneck in forum 4-Tec PerformanceReplies: 17Last Post: 10-21-2007, 06:43 PM
By TX21 in forum Yamaha How To & FAQsReplies: 7Last Post: 07-09-2007, 09:18 PM
By seaobin in forum Polaris Open DiscussionReplies: 1Last Post: 07-07-2007, 03:55 PM
By wakejumper92 in forum Honda How To & FAQsReplies: 1Last Post: 04-15-2007, 01:46 PM