well my brass inserts pulled out on my rxt and broke my grate. i bought the ppg insert repair kit tried putting them in and it split the housing. they are to big to fit in the hole and are to long, so those of you installing these be carefull. i grinded 1 of them down to shorten it and i filed down the threads so it wouldnt be so wide and the other side split. so now i really want to go ride after just doing a complete color change from the viper red to silver pearl. i am going to tig weld the ride plate to the grate to hold in place and be done with it. have any of you done this with good results? let me know?