05-17-2009, 12:57 PM #1
- Join Date
- Aug 2008
DESS Key Wiring...I'm so close (Please Help)
I own a 2004 RXP. With all of my additional mods I needed a Rotax Racing ECU to get to 8800. In order to be able to tap into the Racing ECU I had to change out my original (04) wiring harness to an (07). When I did this I was told that I needed a new DESS Key Post, which i purchased. Interestingly, the there are 4 wires that run from the Dess Key Post (new) to the harness, however there were only 3 wires attached to my original Dess Key Post (old). I was instructed by another member to just hook up the 3 like colors and to leave the black/purple (1 new additional for the new post) alone and not hook it to anything. I did as instructed however when I went to start I'm getting no recognition from the system (no beeps or messages on board) that I've placed a key on the post.
Any ideas? I'm thinking that wire has to attach to something. I just don't have a wiring diagram for an '07.
05-17-2009, 01:12 PM #2
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Hector_750 in forum 4-Tec PerformanceReplies: 22Last Post: 03-15-2011, 02:09 PM
By Polar in forum Polaris Open DiscussionReplies: 1Last Post: 05-28-2010, 10:03 PM
By hotrod_sxty8 in forum 2-Stroke PerformanceReplies: 2Last Post: 05-26-2008, 12:57 PM
By cbrich in forum Sea Doo Open DiscussionReplies: 14Last Post: 04-05-2008, 10:02 AM
By thejake in forum Polaris Open DiscussionReplies: 5Last Post: 09-10-2007, 12:14 AM