Results 1 to 3 of 3
  1. #1
    Reservoir Dawg BobOnThis's Avatar
    Join Date
    Oct 2007
    Location
    O-H-I-O
    Posts
    331
    +1
    3

    So your having lighting issues..

    I thought I would share some info that may cure your problems. A guy taught me this years ago and when he told me I did not believe him. After months of having ground problems and tracking stuff like most of you do this one easy fix, fixed everything! If your trailer is not a full welded set up, which means the tounge is bolted to the rest of the frame..MOST of your problems can be cured doing this. You need to drill a hold where the tounge meets the frame and run a screw through it. What this does is complete the ground on your trailer. I did this on my last trailer and as soonas I did it my lights got real bright and I never had a ground issue since. If you look at the picture below.(I have not done it to this trailer..no probs yet) but you will want to do it right above that bolt to make the trailer one. Try it and tell me if works.


  2. #2
    Reservoir Dawg BobOnThis's Avatar
    Join Date
    Oct 2007
    Location
    O-H-I-O
    Posts
    331
    +1
    3
    sorry forgot pic
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	100_0453.JPG 
Views:	93 
Size:	931.3 KB 
ID:	132182  

  3. #3
    XLTNoob
    Join Date
    Jul 2007
    Location
    Baytown, TX
    Posts
    400
    Some good info there.

    I used to be a CSR over at U-Haul.

    90% of trailer lighting problems were grounding issues.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Anyone have fuel issues at MB ?
    By WFO in forum Mudbug Nationals PWC.Life Rally
    Replies: 67
    Last Post: 06-21-2007, 11:27 AM
  2. Replies: 16
    Last Post: 05-30-2007, 01:49 PM
  3. Think your having a bad day on the forums?
    By Insanediego Joe in forum Yamaha Open Discussion
    Replies: 1
    Last Post: 07-17-2006, 11:19 PM
  4. SO your Cat convertor failed. WHat kinda of performance ?
    By FSTGPR in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 06-27-2006, 04:25 PM
  5. so I have the new computer going...But
    By two2curupt in forum Sea Doo Open Discussion
    Replies: 1
    Last Post: 02-15-2006, 07:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •