Results 1 to 7 of 7
  1. #1

    Join Date
    Jan 2006
    Location
    STL
    Posts
    92

    2005 PUMP CONVERSION

    does anyone know the part number for the drive shaft for the 2002 gpr??


  2. #2
    ABBOTT's Avatar
    Join Date
    Jul 2005
    Location
    Birmingham, AL / Lay Lake
    Posts
    3,736
    +1
    96
    If you are considering converting to the 05 pump "combo" here is the Parts list with part numbers for a "complete" shaft/stator/bearings/seals/85 mm reduction nozzle/pump cone assembly.
    You can save money by using your current driveshaft.

    The driveshaft on the 2005 GPR is the same as the 2000-2001-2003-2004
    2002 uses a different Driveshaft.

    The list does not include the dyna-fly impeller.
    You know where to go for that

    These part numbers are from www.boats.net

    I did not list prices for due respect.

    OEM Part Numbers
    yamaha 66V-45511-00-00 SHAFT, DRIVE
    yamaha 60T-51318-00-94 NOZZLE
    yamaha 66V-R1348-10-00 SPACER
    yamaha 9299R-16600-00 WASHER
    yamaha 93306-304U1-00 BEARING
    yamaha 90110-06822-00 BOLT, HEXAGON SOCK
    yamaha 6B6-51326-10-00 CAP
    yamaha 93306-205U0-00 BEARINGThis part has been replaced by [93306-205U1-00] and may be substituted.
    yamaha 65V-45538-00-00 SPACER 1
    yamaha 93101-28M66-00 OIL SEAL
    yamaha 93101-28002-00 OIL SEAL
    yamaha 6B6-51315-00-94 DUCT, IMPELLER
    yamaha 93210-464A3-00 O-RING(JN7)
    yamaha 9531P-16700-00 NUT

  3. #3

    Join Date
    Jan 2006
    Location
    STL
    Posts
    92
    yeah i know but that is not the drive shaft for the 02

  4. #4
    ABBOTT's Avatar
    Join Date
    Jul 2005
    Location
    Birmingham, AL / Lay Lake
    Posts
    3,736
    +1
    96
    sorry. i am retarded. Gosh, Billy is probably going to chime in here in a sec and can answer that one.

  5. #5
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23
    68Y-45511-00-00 SHAFT, DRIVE $224.82
    www.boats.net


  6. #6
    Hydrotoys's Avatar
    Join Date
    Jul 2005
    Location
    Mesa, AZ
    Posts
    16,712
    +1
    85
    Are you doing a pump EXTENSION like the 2005, or just want to upgrade the pump to a 2005?

    If just upgrading the pump, then use the driveshaft you have. If you need a shorter 2002 driveshaft, don't buy a new one, give me a call. I have a couple.

    If you are doing the 05 along with the 2" extension, the parts are listed here too.
    http://www.greenhulk.net/yamaha/viewtopic.php?t=338

  7. #7

    Join Date
    Jan 2006
    Location
    STL
    Posts
    92
    yeah im doing the 05 pump upgrade and extention

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2005 PUMP CONVERSION PARTS LIST.
    By RX951 in forum Yamaha How To & FAQs
    Replies: 25
    Last Post: 05-01-2007, 09:10 PM
  2. IR PUMP CONVERSION
    By ISLANDRACING in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 03-27-2006, 08:50 PM
  3. 2005 pump swap for 2001-2002 GPR
    By TJBrad04 in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 03-14-2006, 05:41 PM
  4. What all parts do i need to do the 05 pump conversion ??
    By slow1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 12-23-2005, 05:44 PM
  5. Parts list for RXT pump conversion for GTX?
    By 01xdime in forum 4-Tec Performance
    Replies: 2
    Last Post: 11-19-2005, 09:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •