Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14
  1. #1
    Jug Inspector
    Join Date
    Aug 2006
    Location
    Chicago Burbs
    Posts
    552

    FS or FT: 1995 Sea Doo XP800 (one of 500) CHICAGO AREA

    Limited edition 1995 SeaDoo XP800. Only 500 were made, and just about all of them were race skis. Most have been trashed over the years. I salvaged one. This ski was raced for a few years, so expect a race ski. EVERYTHING on this ski works flawlessly except the fuel gauge (go figure). After putting a meter on the sending unit, I've discovered that's the culprit. I tore this engine down last summer, and replaced all gaskets and seals. It currently has 185 PSI in each hole (can be lowered with new gaskets, which I have), can be safely run on 92 IF you keep the WOT runs to less than 15 seconds. It's hard to do that though! This ski PULLS really hard. NOTE: This is NOT a wrencher. This is a gas and go ski.

    It comes with:

    -Rossier pipe
    -R&D Trim tabs
    -Bored nozzle
    -Ocean Pro Vortex flame arrestors
    -Blueprinted pump
    -Finger throttle
    -Renthal Bars
    -TinyTach tachometer
    -Added 96XP hood with triple guages (all work, including fuel - but sending guage is messed up)
    -Beachouse sponsons
    -Hydro-turf
    -Jettrim seat riser... I took off the seat cover because it tears your legs apart if you aren't wearing a wetsuit
    -R&D scoop intake grate
    -New battery last year
    -3 working keys programmed to the DESS
    -One duckbill drain.
    -Extra waterbox
    -A cover. Not the best of shape but it works!

    To complete this setup to maked it WICKED quick you'd need to add some 44 or 46 Novi's/etc and an MSD.

    No, it's not perfect. Sure is fun though.

    $2000 OBO or TRADE for??? Standup, couch/sit-down, project or not. Or a sled. What do you have?

    Click image for larger version. 

Name:	IMG_0420.jpg 
Views:	1631 
Size:	156.0 KB 
ID:	132452

    Click image for larger version. 

Name:	IMG_0421.jpg 
Views:	672 
Size:	187.0 KB 
ID:	132453

    Click image for larger version. 

Name:	IMG_0422.jpg 
Views:	200 
Size:	149.4 KB 
ID:	132454

    Click image for larger version. 

Name:	IMG_0423.jpg 
Views:	182 
Size:	150.1 KB 
ID:	132455

    Click image for larger version. 

Name:	IMG_0424.jpg 
Views:	963 
Size:	168.3 KB 
ID:	132456

    Click image for larger version. 

Name:	IMG_0425.jpg 
Views:	411 
Size:	188.5 KB 
ID:	132457

    Click image for larger version. 

Name:	IMG_0426.jpg 
Views:	225 
Size:	189.8 KB 
ID:	132458
    Last edited by Ibreakstuff; 05-19-2009 at 03:05 PM. Reason: Add location


  2. #2
    Rampage's Avatar
    Join Date
    Sep 2007
    Location
    Holland, Michigan, United States
    Posts
    2,932
    so lemme get this straight...it RUNS right? I was confused by your post if it needs wrenching and looking over or if its just a pick it up and go ski.

  3. #3
    Jug Inspector
    Join Date
    Aug 2006
    Location
    Chicago Burbs
    Posts
    552
    Runs great, drop it in and go.

  4. #4
    did i catch a thread on you just getting this ski a while back and knew nothing about it ? did you get it all figured out? ski looks good, lots of goodies on this one. looks like a gread deal for someone.

  5. #5
    wrong ski. woops, sorry. there is another xp 800 floating around that has lots of stuff like yours, but is in pretty bad shape. i was like, wow, this guy repainted the hull and completely re built everything and only wants 2 grand ?! lol

  6. #6
    Jug Inspector
    Join Date
    Aug 2006
    Location
    Chicago Burbs
    Posts
    552
    Mine was pretty beat up as well. Kind of how it goes.

  7. #7
    Jug Inspector
    Join Date
    Aug 2006
    Location
    Chicago Burbs
    Posts
    552
    Anyone have a project ski or standup they want to trade?

    No one has blown their toy up already and wants to get back on the water ASAP????

  8. #8
    Banned User
    Join Date
    Aug 2007
    Location
    Reading PA
    Posts
    1,670
    still for sale i would be interested in it does it have a trailer???

  9. #9
    Jug Inspector
    Join Date
    Aug 2006
    Location
    Chicago Burbs
    Posts
    552
    PM sent.

  10. #10
    MILLER PHASE 3 1050's Avatar
    Join Date
    Sep 2006
    Location
    909\951
    Posts
    708
    +1
    3
    where is the vin plate on the motor and why was it removed ?also you can tell somebody was pipe wrenching around on that pto whats the deal with that ?it still has holes where it had umi steering on it ...what brand paint did you use to paint that hood ?

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS 1995 sea doo xp800 limited.
    By dan725 in forum Sea Doo 2 Stroke Skis
    Replies: 4
    Last Post: 12-01-2014, 11:40 PM
  2. ------------------1995 Sea-Doo XP--------------------
    By MikeXP in forum 2-Stroke Performance
    Replies: 25
    Last Post: 05-18-2011, 10:19 PM
  3. Newbie Questions on 1995 Sea Doo GTX, 1st ski.
    By shinyside in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 05-10-2010, 08:22 AM
  4. 1995 Sea Doo HX - With Mods
    By seatsR4toilets in forum Sea Doo 2 Stroke Skis
    Replies: 14
    Last Post: 09-25-2009, 09:21 AM
  5. Finally my 1996 sea doo XP800
    By aruba yamaha in forum 2-Stroke Performance
    Replies: 0
    Last Post: 07-22-2008, 09:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •